Home/Chassis/ Brakes
  • 2 to 1 Cable Junction Box ( 1 cable in - 2 cables out ) Round Steel Junction with thread on top cap and Nylon inner slide/Junction. For Custom Cable Building Upper Single inlet fits a 6mm. OD. outer cable Lower Dual outlet fits two outer cables of 5mm. OD. Note: Cable Box must be crimped to retain outer cable ends once they are fitted to the junction box.   Part #51-6508 $16.75 Ea.
  • Tach Drive Housing Part #51-6511 $8.00 Ea.
  • Out of stock
    Threaded Adaptor (Male Thread) - The cable end threads on to this piece at the engine drive end and we offer this as a replacement for damaged or lost adaptors. Replacement stock adaptor as used on 1970-84 650's.   Part #51-6512 $5.60 Ea.
  • Out of stock
    Alloy Block Off Cap - for Tachometer Drive. Seals Out Dirt if Drive is No Longer Used. Fits: All 650's   Part #51-6514 $5.60 Ea.
  • Retainer Clip - Holds Throttle Cable to Throttle Housing Fits: 1970-75 650's with dual throttle cables.   Part #51-6515 $2.30 Ea.
  • Retainer Clip for Single type throttle cable. Holds Throttle Cable to Throttle Housing Fits: 1977-84 650's with single throttle cables.   Part #51-6517 $2.25 Ea.
  • Out of stock
    Bolt - Special bolt that holds the Tach drive into the cluth case ( RH Case ). Fits: All 650's 1970-84 OEM Ref.# 256-17867-00, 90109-06076-00   Part #51-6518 $3.95 Ea.
  • +6" Upper Cable Extension to Lengthen any XS/TX Tach or Speedo Cable on custom bikes requiring a longer cable due to extended forks or non stock instrument placing. Black Color.   Part #51-7040 $6.95 Ea.
  • +8" Upper cable extension to Lengthen any XS/TX Tach or Speedo Cable on custom bikes requiring a longer cable due to extended forks or non stock instrument placing. Black Color.   Part #51-7041 $6.95 Ea.
  • Out of stock
    Extended Clutch Cable - (Black) Clutch - Same as Clutch cable #51-3204 but + 350mm. (13.75") in length. Total outer cable casing length including metal bend that fits to engine is approx 66.5" (1690mm). Fits: Custom High Bar applications for TX/XS650's (1974-84). Great for many custom applications for many bikes. Note: Soldering required and length difference between inner and outer cables must be kept same as stock cables.   Part #51-9204 $15.20 Ea.
  • Out of stock
    Extended Throttle Cable - (Black) Throttle - Same as Throttle Cable #51-3502 but + 350mm.(13.75") in length. Fits: Custom High bar applications for XS650's (1978-84). Note: Soldering required and length difference between inner and outer cables must be kept the same as stock cables.   Part #51-9502 $15.20 Ea.
  • Out of stock
    Extended Throttle Cable - (Black) Throttle - Same as Throttle cable #51-3510 (RH throttle cable to fit TX650A/XS650B (1974-75) but + 350mm. (13.75") in length. Total outer cable casing length including throttle end adjuster fitting is approx 56.75" (1441mm.). Cut the outer cable to the desired length, crimp on the casing ferule, trim the inner cable to length and then solder on the carb end cable nipple (ferule and end nipple included in pack). Fits: Custom High bar applications (RH side) for TX650A/XS650B (1974-75). Note: Soldering required and length difference between inner and outer cables must be kept same as stock cables.   Part #51-9509 $14.75 Ea.
  • Out of stock
    Extended Throttle Cable - (Black) Throttle - Same as Throttle cable #51-3510 (LH throttle cable to fit TX650A/XS650B (1974-75) but + 350mm (13.75") in length). Total outer cable casing length including throttle end adjuster fitting is approx 56.75" (1441mm). Cut the outer cable to the desired length, crimp on the casing ferule, trim the inner cable to length and then solder on the carb end cable nipple (ferule and end nipple included in pack). Fits: Custom High bar applications (LH side) for TX650A/XS650B (1974-75) Note: Soldering required and length difference between inner and outer cables must be kept same as stock cables.   Part #51-9510 $14.75 Ea.
  • Chain Guard - Chrome - Replica of Original "Special" model chain guard.   Fits: 1974-84 650 "Special" or Standard models. Note: Remove the Rear Wheel to install Chain Guard   Part #56-0001 $50.95 Ea.
  • Chain Guard - Black - Replica of Original "Special" model chain guard.   Fits: 1974-84 650 "Special" or Standard models. Note: Remove the Rear Wheel to install Chain Guard   Part #56-0002 $50.95 Ea.
  • Out of stock
    Clip Link- Replacement for 530 HT IZUMI Chains. Press Fit type side plate for high strength. Part #56-0053 $2.90 Ea.
Go to Top