• Sale!
    Kickstarter Lever Assembly with Chrome plated Lever Shaft Later Heavy Duty type Kickstarter with rubber (swings out further for more clearance from arm to brake pedal and exhaust). Fits: All 650 Engines 1974-84   Part #19-6505 $39.95 Ea.
  • Out of stock
    Tank Badge - (2pc Set - 1RH & 1LH) - Like # 65-6502 but with White Chrome letters. Fits: 1978-84 XS650   Part #65-6503 $28.91/Set/2
  • Out of stock
    Kickstarter Lever Assembly with Chrome plated Lever Shaft Early Heavy Duty type Kickstarter with rubber. Fits: All 650 Engines 1970-73   Part #19-6504 $29.95 Ea.
  • Gas Cap XS1/XS2/TX650 Gas Cap XS1/XS2 with Latch Lever.   Part #20-0650 $29.95 Ea.
  • Out of stock
    Spoke Set - Front 64 pc. + Nipples - Cadium Plated High Qualitity Spokes Fits: "Heritage Special 19" x 64 spoke front wheel. This set has 2 lengths of inner spokes and 2 lengths of outer spokes. Note: Fits: "Heritage Special" OEM type Rim - Laces to the stock 19" x 64 spoke Disc brake type "Heritage Special" front Hub.   Part #19-0052 $29.95/Set
  • Tank Badge - (2pc Set - 1RH & 1 LH) - Gold Chrome Letters. Fits: 1978-84 XS650   Part #65-6502 $29.97/Set/2
  • Drive Chain Riveter Tool - Rivets high strength rear drive chain Rivet links with hollow pin ends as on our IZUMI 530HT Chain (Rivet link #56-0235) and many DID brand chains. Part #35-0006 $34.95 Ea.
  • Sale!

    Chain Guard- Black

    $34.95
    Chain Guard - Black - Replica of Original "Special" model chain guard.   Fits: 1974-84 650 "Special" or Standard models. Note: Remove the Rear Wheel to install Chain Guard   Part #56-0002 $50.95 Ea.
  • Out of stock
    Badge - Black and Chrome for Yamaha 650 Specials 1978-84 XS650SE/SF/SG/SH/SJ/SK/SL OEM Reference # 211-24161-00-00 but with relocated mount holes.   Part #65-6506 $34.95 Ea.
  • Sale!
    Grab Rail - Polished Chrome, includes special rear fender mount bolts. Fits: 1976-79 XS650 "Standard" models. Note: Grab Rail bolts thru rear fender ( into Grab rail ) and top of rear shocks. May not Fit if Bike has a Frame lifting handle.   Part #68-6809 $35.70 Ea.
  • Out of stock
    Petcock - Non Vacuum Type Petcock - Non Vacuum Type to Replace 1978-84 Vacuum Type Petcocks. or to fit Standard type fuel tanks produced by Mike Lalonde prior tp 2011. 1.81" (46mm.) Center to center bolt holes - Fits Right or Left All 1978-84 North American market 650's have original petcocks operated by Vacuum from a line to the intake (on carb holder). 1978-79 models have 2 and 1980-84 models have 1 petcock. Vacuum petcocks are chronic leakers and are all getting to the point of being non-repairable. Our petcock is the Early type 650 manual petcock with a wider flange cast on it so it will fit in place of the vacuum types. Our Petcock fits to right or left and each comes with the tap to tank O-Ring seal and assorted outlet fittings (petcock has 2 outlet ports). Fittings included: 2 ninety degree, 1 Straight fitting & 1 outlet port Plug. There is an "ON", "OFF" and "Reserve" position.   Part #20-0019 $35.95 Ea.
  • Throttle Cable (Black) Fits: 1976-84 Stock Throttle to Mikuni VM 34/36/38mm. Non CV aftermarket carburetors. 2-1 type design, machined steel junction box. - Quality made in Japan. Also fits XS Performance Keihin PWK 32 Carb Kit (Part # 48-9010 ) - Replacement 2-1 Throttle cable for for XS650.   Part #51-6506 $36.50 Ea.
  • Sale!
    Clip-On Handlebar Set - Chromed Steel - Fits: 35mm. forks on 1977-84 650's Note: Clip-Ons are Race parts and may Not work with the stock controls/switches on All models/years. Bar length is 8.0" .   Part #25-1090 $42.95 Set
  • Center (Main) Stand. Replaces Stands on All North American 1974-84 XS650's. Also has fittings for Dual return springs as used on European Models.   Part #37-0018 $37.95 Ea.
  • Tachometer - Chrome Mini - 2.25" ( 60mm. ) Diameter. - White face, 0-12,000 RPM for Yamaha 650's. Internal illumination. Mechanical ( cable drive ) type. 1:5 ratio Part #03-0755 $40.95 ea.
  • Out of stock
    Clip-On Handlebar Set - Chromed Steel - Fits: 34mm. forks on 1971-76 650's Note: Clip-Ons are Race parts and may Not work with the stock controls/switches on All models/years. Bar length is 8.0" .   Part #25-1089 $41.95 Set

Go to Top