-
Out of stockExtended Throttle Cable - (Black) Throttle - Same as Throttle cable #51-3510 (RH throttle cable to fit TX650A/XS650B (1974-75) but + 350mm. (13.75") in length. Total outer cable casing length including throttle end adjuster fitting is approx 56.75" (1441mm.). Cut the outer cable to the desired length, crimp on the casing ferule, trim the inner cable to length and then solder on the carb end cable nipple (ferule and end nipple included in pack). Fits: Custom High bar applications (RH side) for TX650A/XS650B (1974-75). Note: Soldering required and length difference between inner and outer cables must be kept same as stock cables. Part #51-9509 $14.75 Ea.
-
Out of stockExtended Throttle Cable - (Black) Throttle - Same as Throttle cable #51-3510 (LH throttle cable to fit TX650A/XS650B (1974-75) but + 350mm (13.75") in length). Total outer cable casing length including throttle end adjuster fitting is approx 56.75" (1441mm). Cut the outer cable to the desired length, crimp on the casing ferule, trim the inner cable to length and then solder on the carb end cable nipple (ferule and end nipple included in pack). Fits: Custom High bar applications (LH side) for TX650A/XS650B (1974-75) Note: Soldering required and length difference between inner and outer cables must be kept same as stock cables. Part #51-9510 $14.75 Ea.
-
Sale!Chain Guard - Chrome - Replica of Original "Special" model chain guard. Fits: 1974-84 650 "Special" or Standard models. Note: Remove the Rear Wheel to install Chain Guard Part #56-0001 $50.95 Ea.
-
Sale!Chain Guard - Black - Replica of Original "Special" model chain guard. Fits: 1974-84 650 "Special" or Standard models. Note: Remove the Rear Wheel to install Chain Guard Part #56-0002 $50.95 Ea.
-
Out of stockClip Link- Replacement for 530 HT IZUMI Chains. Press Fit type side plate for high strength. Part #56-0053 $2.90 Ea.
-
Out of stockRivet Type Joiner Link for 530HT Chains. New hollow end Rivet Type. Use this link for Maximum Chain Strength. Part #56-0235 $4.80 Ea.
-
Sale!Tank Badge - Black and Red Background with White Chrome Letters. Original for 1970 XS1. Fits: 1970-72 XS1/XS1b/XS2 650's. Note: Will not fit later 650's. Part #65-6500 $29.95 Ea.
-
Out of stock
Badge - Black and Chrome for Yamaha XS1, XS1b, XS2 1970-72 Black Background with Chrome Letters. Fits:XS1/1b/XS2 70-72 Tank OEM Reference # 211-24161-00-00. Part #65-6501 $29.95 Ea. For Later models see 65-6506 -
Sale!Tank Badge - (2pc Set - 1RH & 1 LH) - Gold Chrome Letters. Fits: 1978-84 XS650 Part #65-6502 $29.97/Set/2
-
Out of stock
Tank Badge - (2pc Set - 1RH & 1LH) - Like # 65-6502 but with White Chrome letters. Fits: 1978-84 XS650 Part #65-6503 $28.91/Set/2 -
Sidecover Emblem Set/2 - Gold - Fits: for XS650SG "Special" 1980 but also fits to all 78-81 "Specials" Note: This set is 2pc. of RH Sidecover badges. These fit to both sidecovers and the difference (Checkmark) is not usually noticeable unless they are installed on old paint. Part #65-6504 $14.95 Set/2 -
Out of stockBadge - Black and Chrome for Yamaha 650 Specials 1978-84 XS650SE/SF/SG/SH/SJ/SK/SL OEM Reference # 211-24161-00-00 but with relocated mount holes. Part #65-6506 $34.95 Ea.
-
Out of stock
Sidecover Emblem Set/2 Silver - Fits: "Heritage Specials" (3NO) - Stock Adhesive Mount Back. Part #65-6507 $17.95/Set/2 -
Out of stockXS1/XS1b/XS2/TX650 70-73 Grab Rail Chrome grab rail for stock 1970-73 seat Part #68-6800 $22.50 Ea.
-
Out of stockSeat bottom Document holder - Original type as used on stock 1977-84 XS650 seat bottom. Part #68-6805 $5.50 Ea.
-
Out of stockSeat Hinge Clevis Pin - Set/2 This is for Hinge Pin only. Pin Oem Ref.# 91501-05055/91701-05055. Fits: 447 "Standard" model type seats (1974-79) Part #68-6806 $4.90/4pc. set
-
Sale!
Shoulder Bolts - Replacement for Stock Rear Fender Mounting Bolts as used on 1974-79 "Standard" models. These Bolts pass thru the stock rear fender, the rear fender mount rubbers and into the grab rail mount. Bolts also are replacements for the bolts included with grab rail #68-6809. Part #68-6810 $8.40/Set/2 -
Out of stock
XS1/XS1b/XS2 70-72 Replica Seat Assembly Steel seat Pan, Hardware ( Hinges, hook for seat latch and seat prop assembly ) included. Accepts passenger seat grab rail ( not included ). NOTE: These seats DO NOT fit any other Yamaha models or models of XS650's not listed above. Part #68-6904 . Only 2 left . There is minor blemished. On sale $ 169.95 -
Sale!Cafe/Sport seat Seat Assembly - Fits:1980-84 "Special" models - Latching Lift Off Type Complete with rear Latching mechanism, base damper rubbers, Document holder, Steel seat Pan NOTE: These seats DO NOT fit any other Yamaha models or models of XS650's not listed above. Part #68-6906 $199.95 Ea. Minor blemishes sale for $ 99.00
-
Sale!5pc. Rubber Cushion Set Set contains 4 pc. of short seat rubbers ( #07-4623 ) plus 1 pc. of tall type #97-0010 Fits: Seat bottoms of North American model TX650A (74), XS650B/C/D/E/F, ( 75-79 ), XS650SE/SF/2F 78-79 Part #68-6912 $8.95/Set/5
-
Sale!Seat Rubber Cushion Set 5pc.( 07-4623 ) Rubber Cushion Set for the Seat Base on our Seat #68-6904. Replacements for 70-73 seat # 68-6904 Only. Rubbers are Not the same as 1970-73 rectangular originals. Part #68-6915 $9.75/Set/5
-
Out of stockRubber Bumper - Stand Stop Rubber - Also for use with Aftermarket Muffler Center Stand Stops. Rubber bumper is mounted to muffler and/or frame. 1" Dia x 9/16" Long - Fits into 3/8" (10mm) Hole. OEM Ref. # 278-27114-00/01/A0, 371-27114-00-00. Used on All TX/XS650's 1974-84 Some models use 2 pc. Part #97-0010 $2.89 Ea.