• Daido 219FTss x 106 - Fits: TX/XS650's 1974-84 (36 tooth cam) The latest high strength cam chain from D.I.D. for late XS650's. High Quality Made in Japan. Note: Chain is Not endless and 1 Joiner link is included. Installation Note: Cam Chain IS absolutely correct original brand/size/length/type Original install will be Very tight as chain is pressure injected with grease at factory and head gasket is not yet compressed. Install with tensioner assembly out and it may be necessary to pry chain over last half tooth of cam sprocket to get the chain in place so joiner link can be installed. Chain will loosen once head is torqued and engine is run a short time. Part #52-4008 $38.50
  • Sale!
    Nut - Late Cam Chain Adjuster - 22 x 11.5mm. thick. Fits to 18mm. x M1.5 threaded shaft. OEM Ref.# 90179-18274-00 Fits: 1980-84 XS650 2F/G/SG/H/SH/SJ/SK/SL ( Note: 76-79 models did not use a lock nut ) Part #05-0052 $4.00 Ea.
  • Cam Chain - Tsubaki BF05T x 102 with Rivet Link. Pitch .315" (8.0mm). Fits: XS1/XS1B/XS2/TX650 1970-73 (34 tooth cam). Made in Japan. NOTE: Link pitch differs from chains used on later 650's. For 70-73 650's Only! Installation Note: Cam Chain IS absolutely correct original brand/size/length/type Original install will be Very tight as chain is pressure injected with grease at factory and head gasket is not yet compressed. Install with tensioner assembly out and it may be necessary to pry chain over last half tooth of cam sprocket to get the chain in place so joiner link can be installed. Chain will loosen once head is torqued and engine is run a short time. Part #52-5003 $39.95
  • Out of stock
    Tsubaki BF05M Rivet Master Link Pitch .3061" (7.774mm.). Cam Chain Replacement Link Fits: XS650 ,TX650 (74-84 ) Replaces OEM# 94500-02106-00. Part #01-8815 $3.00 Ea.
  • Sale!
    Cam Chain Tensioner Rod to Spring Damper. OEM Ref.# 2H0-12232-00. Original part on XS650H/SH/SJ/SK (1981-84) and will replace OEM # 341-12232-02 as used on (1974-80) models. Part #18-0873 $4.95
  • Tsubaki BF05M x 106 Pitch .3061" (7.774mm.).Cam Chain with one joiner link included. Fits: Yamaha XS650's (74-84) - (36 tooth cam ), Replaces OEM# 94590-02101-00 Part #52-5021 $35.65
  • Sale!
    Cam Chain Tensioner Cap with O-ring OEM Ref.# 90176-18021 18mm. x M1.5 x ( 28 x 30mm. ) with O-Ring Fits: XS650C - SL 1976-84 Part #05-0050 $5.55 Ea.
  • Chrome Cylinder Guide Bar Bolt (Pk./2). Bolt Passes thru cylinder guide bar nuts located at Front/center of cylinder casting and secures cam chain guide bar to cylinder casting (inside cam chain tunnel). Fits: All 650's 1970-84 Part #49-0723 $0.95
  • Sale!
    Cam Chain Tensioner Cap with O-ring OEM Ref.# 90176-12212-01-00 Original part on TX650/A, XS650B 75. Will work on all 70 thru 76 Part #05-0074 $17.50 Ea.
  • Cam Chain Adjuster Cover O-Ring (Nut) - OEM Ref.# 93210-21190 (Late type). Fits: Tensioner type D & E on XS650's. Part #18-0867 $1.90
  • Cam Chain Adjuster Cover (Early) Gasket. OEM Ref.# 256-12214-00. Fits: Type A & B Tensioners as used on XS1/XS1b/XS2/TX650 (1970-73) . Part #18-0677 $2.00
  • Chrome Cylinder Guide Bar Nut (Pk./2) Fits: into Front/center of cylinder casting on All 650's 1970-84. Part #49-0722 $2.95
  • Sale!
    Damper Washer - Cam Chain Tensioner Rod to Spring Fits: XS1/1B (1970-72 ) 6.5mm. x 15 x 2.0mm. # 05-0041  $ 3.95 Ea
  • Sale!
    Replacement Spring for Cam Chain Tensioner, OEM Ref. # 90501-14095, 341-12216-02. Fits: 1974-84 650's. Part #05-0048 $4.20 Ea.
  • Sale!
    Nut - Early Cam Chain Adjuster - 22 x 8 18mm. x M1.5 thread OEM Ref.# 256-12218-00, 90170-18103-00 Fits: 1970-75 TX/XS 650. Part #05-0049 $4.00 Ea.
  • Cam Chain Tool Kit in Case - A "Must Have" Tool to Break and Rivet Cam Chains. Note: Do Not Use for Rear Drive Chains Part #35-0112 $49.95 Set

Go to Top