FacebookXInstagramYouTube
xs650inc@gmail.com
  •

    Drain Plug Crush Gaskets (Pk./2)

    $3.50
    Drain Plug Crush Gaskets - (Pk./2) - Each Engine has 2 Drain Plugs. Replaces OEM# 256-15353-00. 18067-004 40mm. Dia. Copper 11009-1866 Part #17-3802 $3.50 Pk./2
    Add to cart Details

  • Sump Oil Filter Strainer Plate Gasket. Fits: All 650’s 1970-84.

    $3.80
    Sump Oil Filter Strainer Plate Gasket. Fits: All 650's 1970-84. Part #18-0858 $3.80
    Add to cart Details

  • Tappet Cover Gasket

    $2.95
    Tappet Cover Gasket (3 Hole), OEM Ref.# 256-11196-01. Three pieces used on each 1972-84 engine or 4 pieces on all 1970-71 engines. Note: Gasket can be used in place of O-Rings used on later models. Part #18-0673 $2.95
    Add to cart Details

  • Cylinder Head Sealing Washer

    $9.10
    Brass Cylinder Head Washer - Can replace all cylinder head sealing washers or all Head Nut Washers used on any 650. 22mm. OD x 10.5mm. ID x 4mm. Thick.   Part #01-0651 $9.10/pk./4 Note: The Stock Cylinder Head Sealing Washer ( #01-0650 ) has been discontinued as this brass type has never been seen to leak and last indefinitely.
    Add to cart Details

  • Top End Copper Sealing Washer Kit

    $6.50
    Top End Copper Sealing Washer Kit - 9 pc. Kit Contains: 1pc. # 90430-14043 ( @ Oil feed tube base at crankcase), 4 pc. # 90430-10027 ( @ Oil feed tube - Top of head at bolts), 2 pc. # 90430-11033 (@ Rear of cam chain guide support nuts to cylinder front), 2 pc. # 90430-06014 @ (Cam chain guide fastening bolts at front of cylinder). Fits: All 650's Part #18-0870 $5.50
    Add to cart Details

  • Lower Engine Case Screw Set. – 18pc.

    $7.60
    Lower Engine Case Screw Set. - 18pc. Fits: Lower right hand & left hand engine cases on all 650's.   Part #49-0650 $7.60/Set
    Add to cart Details

  • XS650 Overhaul Gasket Set – 72-84

    $54.95
    Overhaul Gasket Kit for XS/TX 650's 1972-84 650cc. ( 75mm.) Contains: 18-0672 x 1, 18-0673 x 3, 18-0675 (1pr.),18-0852 x1, 18-0855 x 1, 18-0856 x1, 18-0857 x 1, 18-0858 x1, 18-0860 x1, 18-0862 x1, 18-0863 x2, 18-0864 x1, 18-0865 (1pr.), 18-0869 x1, Valve Stem Seals 01-0115 x 4, and (18-0851 Base Gasket Do not use gasket cement on this special Gasket). Note: Gasket Sets do NOT contain copper washers, engine oil seals, cylinder head sealing washers, tach drive or cam chain tensioner o-rings/gaskets. ( These are available separate - See listings below ).   Part #18-0208 $49.95/Set
    Add to cart Details

  • Advance/Breaker Housing Screw & Washer Set

    $2.45
    Advance/Breaker Housing Screw & Washer Set ( 6pc. Set ). Includes: 3 countersunk flat-head type screws and 3 matching starlock washers. Fits: All 650's 1970-84 2 sets required to do both engine housings on each engine. Part #49-0711 $2.45 Ea.
    Add to cart Details

  • Oil Dipstick Gasket. Fits: All 650’s 1970-84

    $1.90

    Oil Dipstick Gasket. OEM Ref.# 256-15364-00.

    Fits: All 650's 1970-84

    Part #18-0866 $1.90
    Add to cart Details

  • Rear of Advance or Breaker Housing Gasket

    $2.95
    Rear of Advance or Breaker Housing Gasket. 2 used on each engine. OEM Ref.# 256-11146-00. Fits: All 650's 1970-84 Part #18-0863 $2.95
    Add to cart Details
  • Out of stock

    Headpipe Exhaust Gaskets

    $3.95
    Headpipe Exhaust Gaskets (Pk./2) - Original Yamaha Type. OEM Ref.# 256/3GD-14613-00, 90430-38054. Fits: All 650's 1970-84.   Part #18-0675 $2.95 Pk./2
    Details
  • Out of stock

    Engine Top Fastener Set – 56pc. Fits: 1972-84 650’s.

    $37.95
    56pc. Kit Contains: 3 Hole Tappet Cover chromed Crown Nuts (9pc.) with matching chrome Washers (9pc.) + Cylinder Head chrome Crown Nut (8pc.) + chrome rocker shaft End Plug (4pc.) + Point/Cam Cover chrome Screws (4pc.) + Exhaust Stud chrome Crown Nuts (4pc.) with matching Stainless Lock Washers (4pc.) + 2pc. Chrome Oil tube banjo bolts, + 2pc. Chromed Cylinder front/Cam chain guide bar Nuts, + 2pc. chromed cam chain guide bar bolts+ 4 hole rocker cover nuts & washers. Fits: 1972-84 650's.   Part #49-0653 $37.95/Set
    Details

  • Intake Spiggot Gasket (Pk./2)

    $4.90
    Intake Spiggot Gasket (Pk./2) Intake Spiggot Gasket (Carb Holder Rubber) (Pk./2), OEM Ref.# 256-13556-01. Fits: Between XS650 Manifolds (Carb Spacers) and cylinder head and between the XS manifolds and the carb holders for the PWK 32. Fits: 1970-84 650's Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650. And All Stock Carb Holders. Note: 2 sets required. Part #18-0865 $4.90/Pk./2
    Add to cart Details

  • Tach Drive Housing – O-Ring

    $0.95
    Tach Drive O-Ring. OEM Ref.# 93210-12154. Fits: All 650's (1970-84).   Part #18-0874 $0.95 Ea.
    Add to cart Details

  • Tappet Cover Gasket. Fits: All model XS650’s from 1972-84

    $2.95
    Tappet Cover Gasket (4 Hole) - One piece used on each engine. OEM Ref.#306-11198-00. Fits: All model XS650's from 1972-84 Note: Gasket can be used in place of O-Rings used on later models. Part #18-0672 $2.95
    Add to cart Details

  • Bottom End Copper Sealing Washer Kit

    $7.50
    Bottom End Copper Sealing Washer Kit - 13 pc. Kit Contains: 6pc.of # 90430-08143-00 ( @ Crankcase Bottom - Nut washers), 2 pc.of #90430-06014 ( @ Oil filter cover screws in clutch case), 3 pc. 90430-06014 ( @ 3 Clutch case upper front screws), 1 pc. of # 90430-06014 ( @ Tach drive retaining bolt ), 1pc. 37R-82543-00/90430-11034 ( @ Neutral switch base ). Fits: All 650's.   Part #18-0871 $6.50/Kit
    Add to cart Details
Go to Top