| Clutch Holder Tool - Holds Inner and Outer Clutch Hubs So That the Center Nut May be Removed Without Damaging Hubs. Fits: All 650 clutches (1970-84). Part #35-5021 $7.95 ea. |
-
-
Professional Adjustable Vise Grip Style Clutch Basket and Sprocket Holder Tool. Part #35-9052 $14.95 Ea. -
Out of stock
Piston Pin Puller with Adaptors (12.5, 15.75, 19, 22mm. OD). Easily Removes XS650 Piston Pins (20 & 22mm. OD) Without Damage Part #35-9070 $24.90 ea. -
Out of stock
Clutch Friction Plate Fit: All 650's 1970-84 - Sold Each - Order number of pieces required. 1980-84 models - use 6pc. 1974-79 models - use 7pc.. 1970-73 model clutch friction plates are No longer available but these later types can replace the originals! (6 friction and 5 steel drive plates were originally used). To use these late type friction plates remove the old clutch plate separator O-Rings (discard), and add 1 additional steel drive plate and replace all 6 old type thick friction plates with 7pc. of this new type friction plate. Part #39-1133 $6.29 Ea. -
Out of stock
Clutch Spring Screw Set - 12pc. - 6 Socket Head Bolts with Matching Sleeves. Fits: 1970-84 Clutch Hub Part #39-6504 $29.95
-
Sale!
Needle Bearing with Thrust Washer for Rear of Inner Clutch Hub. Fits: All 650's If your clutch does not seem to release properly or if you have difficulty finding neutral when the engine is hot a worn bearing may be the reason. Our high quality multi-needle bearing assembly is a superior replacement for the original. Note: Bearing Part #39-6505 (OEM Ref.#93341-23504) consists of - 1. the circular bearing race and 2. one thin matching washer. Parts books and manuals show this as 1 part only (not 2 pc). The Clutch must be assembled in Sequence shown above - Bearing with its matching thin washer and then the thick clutch washer (thrust plate). Part #39-6505 $12.95
-
Out of stock
High Performance Clutch Springs - Set of 6 - Replaces/upgrades sagged original stock springs. Fits: All 650's. Part #39-6506 $13.95
-
Clutch Spring Screw - Sold Each. 6 Pieces used per engine. Order what you need. Fits: All 1970-84 XS/TX650's. Part #39-6508 $3.95
-
Clutch Pushrod Bearing, 2 used in each 76-84 engine, (only 1 pc. required if long early 70-75 type clutch pushrod is used). Fits: 1970-84 XS/TX650's. Part #39-6509 $0.90
-
Clutch Pushrod (Short Outer Rod). Stock part for 1976-84 650's but will also work with 1970-75 parts. Part #39-6510 $6.95 -
Out of stock
Clutch Pushrod (Long One-Piece Rod). Replaces both inner and outer pushrod and outer ball bearing used on 76-84's. Provides more stable action and allows less wear of clutch pushrod seal (Note: photo not to scale). Fits: 1970-84 650's. Stock original type for 1970-75 models. Part #39-6511 $12.90 -
Out of stock
Clutch Hub Lock Tab, Oem Ref.# 90215-19139. Fits: 1980-84 XS650's Part #39-6512 $2.90
-
Spring Washer for Clutch Hub Nut, Replaces OEM # 214-16119-00. Fits: 1974-79 650's. Part #39-6513 $2.90 -
Clutch Hub Nut, Oem Ref.# 90170-18221/18089, 156-16174-00. Fits: All 650's 1970-84. Part #39-6514 $3.50 -
Out of stock
Clutch Hub Cush Spring Repair Kit. Replace broken clutch hub cush springs with this kit. Includes 6 Cush springs and special bolts that replace hub rivets. Fits: 1970-84 650's. Part #39-6515 $39.95
-
Out of stock
Clutch Push Screw & Housing Assembly Kit - Kit countains: Push Screw Housing with mount screws, Push Screw with Adjuster and locknut, Return spring and anchor pin, Cable Hook with hinge pin, dust seal. - Sold as a Kit Only . Push screw has Long type actuator arm that gives maximum leverage and provides lightest clutch lever pull. Fits: 1972-84 650's. Part #39-6518 $39.95
