| Spring Steel retaining wire for Inner Clutch Hub (Clutch Boss). This wire holds the first metal clutch plate (special type) in place on the inner clutch hub and is easily damaged if removed from its installed position. One required Fits: 1980-84 XS650G/SG/H/SH/SJ/SK/SL Part #39-6578 $3.90 | |||||
-
Out of stock
-
Lower Engine Case Screw Set. - 18pc. Fits: Lower right hand & left hand engine cases on all 650's. Part #49-0650 $7.60/Set -
Out of stock
55pc. Kit Contains: 3 Hole Tappet Cover chromed Crown Nuts (12pc.) with matching chrome Washers (12pc.) + Cylinder Head chrome Crown Nut (8pc.) + chrome rocker shaft End Plug (4pc.) + Point/Cam Cover chrome Screws (4pc.) + Exhaust Stud chrome Crown Nuts (4pc.) with matching Stainless Lock Washers (4pc.) + 2pc. Chrome Oil tube banjo bolts, + 2pc. Chromed Cylinder front/Cam chain guide bar Nuts, + 2pc. chromed cam chain guide bar bolts. Fits: 1970-71 650's Part #49-0651 $35.70/Kit -
56pc. Kit Contains: 3 Hole Tappet Cover chromed Crown Nuts (9pc.) with matching chrome Washers (9pc.) + Cylinder Head chrome Crown Nut (8pc.) + chrome rocker shaft End Plug (4pc.) + Point/Cam Cover chrome Screws (4pc.) + Exhaust Stud chrome Crown Nuts (4pc.) with matching Stainless Lock Washers (4pc.) + 2pc. Chrome Oil tube banjo bolts, + 2pc. Chromed Cylinder front/Cam chain guide bar Nuts, + 2pc. chromed cam chain guide bar bolts+ 4 hole rocker cover nuts & washers. Fits: 1972-84 650's. Part #49-0653 $37.95/Set -
Chrome Rocker Shaft Plug, OEM Reference #90430-18017-00, 256-11177-00-00, 90340-18017-00. Part #49-0710 $1.75 -
Advance/Breaker Housing Screw & Washer Set ( 6pc. Set ). Includes: 3 countersunk flat-head type screws and 3 matching starlock washers. Fits: All 650's 1970-84 2 sets required to do both engine housings on each engine. Part #49-0711 $2.45 Ea. -
Oil Delivery Tube Banjo Bolt Pk./2 - Attaches Delivery Pipe to Cylinder Head - Chrome Plated. Part #49-0720 $7.65 -
Chrome Cylinder Guide Bar Nut (Pk./2) Fits: into Front/center of cylinder casting on All 650's 1970-84. Part #49-0722 $2.95 -
Chrome Cylinder Guide Bar Bolt (Pk./2). Bolt Passes thru cylinder guide bar nuts located at Front/center of cylinder casting and secures cam chain guide bar to cylinder casting (inside cam chain tunnel). Fits: All 650's 1970-84 Part #49-0723 $0.95 -
Daido 219FTss x 106 - Fits: TX/XS650's 1974-84 (36 tooth cam) The latest high strength cam chain from D.I.D. for late XS650's. High Quality Made in Japan. Note: Chain is Not endless and 1 Joiner link is included. Installation Note: Cam Chain IS absolutely correct original brand/size/length/type Original install will be Very tight as chain is pressure injected with grease at factory and head gasket is not yet compressed. Install with tensioner assembly out and it may be necessary to pry chain over last half tooth of cam sprocket to get the chain in place so joiner link can be installed. Chain will loosen once head is torqued and engine is run a short time. Part #52-4008 $38.50 -
Out of stock
Cam Chain - Tsubaki BF05T x 102 with Rivet Link. Pitch .315" (8.0mm). Fits: XS1/XS1B/XS2/TX650 1970-73 (34 tooth cam). Made in Japan. NOTE: Link pitch differs from chains used on later 650's. For 70-73 650's Only! Installation Note: Cam Chain IS absolutely correct original brand/size/length/type Original install will be Very tight as chain is pressure injected with grease at factory and head gasket is not yet compressed. Install with tensioner assembly out and it may be necessary to pry chain over last half tooth of cam sprocket to get the chain in place so joiner link can be installed. Chain will loosen once head is torqued and engine is run a short time. Part #52-5003 $39.95 -
Tsubaki BF05M x 106 Pitch .3061" (7.774mm.).Cam Chain with one joiner link included. Fits: Yamaha XS650's (74-84) - (36 tooth cam ), Replaces OEM# 94590-02101-00 Part #52-5021 $35.65
