• Sump Oil Filter - (New and Upgraded design with perforated metal to back up the filtering element). Stock original filters tear at low milage and allow unfiltered oil to flow to the oil pump. OEM Ref.# 256-13411-01. Fits: All 650's 1970-84. Part #15-6500 $24.95
  • Stock Oil Filter Screen - Fits in RH Engine Side Cover (Clutch Side) - Made in Japan - OEM Ref.# 256-13441-00. Fits: All 1970-84 XS/TX650's. Part #15-6501 $9.95
  • Out of stock
    Stock Type Magnetic Drain Plug. OEM Ref.# 256-15351-00. Fits: All 650's 1970-84 Note: Each engine has 2 drain plugs. Part #15-6502 $10.95
  • Performance Oil Filter & Cooler Kit developed by Heiden Tuning of Holland. Kit uses common (Honda) replaceable paper element filter that provides better oil filtration than the stock filter screen. Kit installs directly to existing screen location and requires No modifications at all to install. Uses Stock gaskets. Aluminum Billet construction features a finned housing that also provides enhanced Oil Cooling. Kit is complete with Gaskets, Mounting Hardware and internal housing parts (Not shown) plus a filter element. No mods to install . - improved filtration > Improved Cooling = Longer Engine Life Fits: All 650's 1970-84 Part #15-6504 $79.00
  • Paper Oil Filter Element for XS#15-6504 Performance Oil Filter/Cooler Kit Filter is Honda OEM # 15410-KF0-305/315 / 15412-KF0-000/010 as is used on Honda XL/XR models. Part #15-6505 $4.20
  • Replacement Socket Head Bolt Set - (Pk/2) Fits: Housing on XS Performance Heiden Filter cooler Part #15-6504 $1.35
  • Drain Plug Crush Gaskets - (Pk./2) - Each Engine has 2 Drain Plugs. Replaces OEM# 256-15353-00. Part #17-3802 $3.50 Pk./2
  • Overhaul Gasket Kit for XS/TX 650's 1972-84 650cc. ( 75mm.) Contains: 18-0672 x 1, 18-0673 x 3, 18-0675 (1pr.),18-0852 x1, 18-0855 x 1, 18-0856 x1, 18-0857 x 1, 18-0858 x1, 18-0860 x1, 18-0862 x1, 18-0863 x2, 18-0864 x1, 18-0865 (1pr.), 18-0869 x1, Valve Stem Seals 01-0115 x 4, and (18-0851 Base Gasket Do not use gasket cement on this special Gasket). Note: Gasket Sets do NOT contain copper washers, engine oil seals, cylinder head sealing washers, tach drive or cam chain tensioner o-rings/gaskets. ( These are available separate - See listings below ).   Part #18-0208 $49.95/Set
  • Out of stock
    Overhaul Gasket Set for Yamaha XS1/XS1b ( 70-71 ) 650cc. ( 75mm.) Contains: 18-0672 x 1, 18-0673 x 3, 18-0675 (1pr.),18-0676 x1, 18-0855 x 1, 18-0856 x1, 18-0857 x 1, 18-0858 x1, 18-0860 x1, 18-0862 x1, 18-0863 x2, 18-0864 x1, 18-0865 (1pr.), 18-0674 x1, Valve Stem Seals 01-0115 x 4 and (18-0851 Base Gasket. Note: Gasket Sets do NOT contain copper washers, engine oil seals, cylinder head sealing washers, tach drive or cam chain tensioner o-rings/gaskets (These are available separate - See listings below).   Part #18-0652 $59.95/Set
  • Tappet Cover O-Ring - Made in Japan by original supplier (Ars). Sold Each. Fibre gaskets can be used on all 650's, these O-Rings can be used only on engines with the O-ring groove in the tappet cover cap. Part #18-0671 $ 9.95/Pk./4
  • Tappet Cover Gasket (4 Hole) - One piece used on each engine. OEM Ref.#306-11198-00. Fits: All model XS650's from 1972-84 Note: Gasket can be used in place of O-Rings used on later models. Part #18-0672 $2.95
  • Tappet Cover Gasket (3 Hole), OEM Ref.# 256-11196-01. Three pieces used on each 1972-84 engine or 4 pieces on all 1970-71 engines. Note: Gasket can be used in place of O-Rings used on later models. Part #18-0673 $2.95
  • Left Hand Crankcase Cover Gasket. OEM Ref.# 256-15451-00. Fits: 1970-71 XS1/XS1b Only.   Part #18-0674 $6.95 Ea.
  • Out of stock
    Headpipe Exhaust Gaskets (Pk./2) - Original Yamaha Type. OEM Ref.# 256/3GD-14613-00, 90430-38054. Fits: All 650's 1970-84.   Part #18-0675 $2.95 Pk./2
  • Out of stock
    Gasket - Cylinder Head - (77.5mm), OEM# 256-11181-01. Fits: XS1/XS1B 1970-71 Only! Part #18-0676 $24.95
  • Cam Chain Adjuster Cover (Early) Gasket. OEM Ref.# 256-12214-00. Fits: Type A & B Tensioners as used on XS1/XS1b/XS2/TX650 (1970-73) . Part #18-0677 $2.00

Go to Top