-
Sale!Straight Hanger Strap - Black - 5.5" with 2 oblong holes.Gloss Black Part # 07-0207 $3.85 Ea.
-
Sale!Metal center stand stop bracket. Black - 6 1/4" long with oblong mount hole. Part # 07-0209 $3.85 Ea.
-
Sale!Metal center stand stop bracket. Black - 4 5/8" long with 9mm. oblong mounting hole. Part # 07-0210 $3.85 Ea.
-
Out of stockMetal Center Stand Stop Bracket Metal Center Stand Stop Bracket. Black - 3 5/8" long with oblong mount hole (mounts to passenger peg stud). This bracket is used with rubber center stand bumper listed above to prevent metal to metal contact between center stand and exhaust systems Part #07-0211 $6.50 CAD Ea
-
Sale!2 1/8" Chrome Heavy Duty Center Clamp with Nut & bolt. Fits: MAC 2-1 at collector. Part # 07-0409 $4.85 Ea.
-
Sale!1 5/8" Chrome Heavy Duty Center Clamp with Nut & bolt.For custom use Fits: MAC 2-1 at Y and 2-2 exhaust at collector. Part # 07-0417 $4.85 Ea.
-
Out of stockComplete Replica 70-73 Exhaust System Replica of the Original 650 Exhaust System For 1970-73 XS1/XS1b/XS2/TX650. Features - Good Looks, Chrome finish, finned Headclamps, high quality Mufflers with original type internal components for that great original sound, Mounting hardware included. Headpipes are single thickwall type - 1.25" ID. "Best sounding system ever made for the 650" Part #07-0651 $429.00/System
-
Out of stock
Replica Muffler Set Replica Muffler Set - Original for XS1/XS1b/XS2/TX650 (1970-73) and also used for our later model systems #07-0749 and #07-0750. Chrome Plated. 1 each of LH and RH side. "Best sounding Mufflers ever made for the 650" Includes Joint nuts, 25 1/2" long. 94mm diameter. Part #07-0652 $244.95/set/2 -
Sale!Replica Headpipe Set
Replica Headpipe Set - 07-0653 Original for XS1/XS1b/XS2/TX650 (1970-73) Chrome plated Replica Headpipe Set for XS1/XS1b/XS2,TX650 ( 1970-73 ) Original Bends, Finned Headpipe Clamps and heavy duty single thick wall construction - 1.25" ID x 1.5" OD. Part #07-0653 -
Sale!XS Performance 1.5 " OD Headpipes
07-0757 XS Performance Chrome 1.5 " OD Headpipes Fits: All 650's 1970-84 Part # 07-0757 -
Sale!Stainless Steel " 1.75" OD Headpipes 07-0758 Stainless steel 1.75 " OD Headpipes Stainless Steel XS Performance Headpipe Set - 1.75" ( 45mm.) OD x 1.65" ( 42mm.) ID x 39" Long. When Mounted the ends of the headpipes are approx. 5" past the back edge of the engine Clutch ( RH ) Cover. New Chromed OEM type Finned Headclamps included! Fits: All 650's 1970-84 Fits: to our #07-0041, 07-0015 or 07-0014 Mufflers. For maximum bottom end power these headpipes should be used with Headpipe Exhaust port Torque optimizers ( Diodes ). Part # 07-0758
-
Out of stockFinned Head Clamp - XS Perf. Headpipes Finned Head Clamp - XS Performance Headpipes# 07-0757 44.2mm. Id (2 3/4") x 12mm.thick. 10mm. holes @ 70mm. Center to Center . Part #07-0760 $17.45 Ea.
-
Sale!Ascot Headpipe Set for custom exhaust fabrication ( New type 2 ). Left Headpipe Passes under Engine. Right Headpipe passes under Clutch ( RH Engine cover ) Case. 42mm. OD. Headpipes Include OEM type finned headclamps. Mufflers not included. Note: Center stand must be removed to use the Headpipes. Fit: 1978-84 " Special "
-
Sale!
2-1 XS Performance Headpipe Set XS Performance 2-1 Chrome XS Performance Headpipe Set with Collector. 1 1/2" OD Headpipes with finned clamp and a collector pipe (45.3mm.OD) with a slight kick up. Fits: XS650 (1980-84) Note: Muffler NOT Included. In Dyno Development this system with a free flowing muffler added and unprecedented 10HP+ rear wheel to a completely stock 1980 XS650. Designed to work with our taper Tip #07-0041 muffler or our #07-0114 short megaphone or any free flowing muffler that will fit onto the 45.3mm (1.783") OD collector. This system produces more power than any other we have tested or developed. Part #07-0767 -
Sale!
Headpipe Torque Inserts Dyno Developed Headpipe Torque Inserts (Set/2). Inserts increase low end torque that is lost when large Diameter headpipes are installed on the XS650. CNC machined steel inserts fit our XS650 Exhaust #07-0768, 07-0753, 07-0751,07-0752 and other headpipes with an inside diameter of 41mm. (1.61") or greater. Part #07-0769 $36.95/Set/2 -
Out of stock
Ascot Street Tracker Exhaust Ascot Street Tracker Exhaust - New Style, Good Looks & Sounds Good. Comes complete with Mount Brackets. Headpipes are 42mm.OD (1.5" ID). Chrome plated. 07-0112 mufflers with one headpipe passing under engine inside of frame. Fits: 1978-84 "Specials" Part #07-0770 $379.95/system