• Sale!
    HD Steel Exhaust Bracket with Bolts. Slides into the Hanger strap slot and is used instead of bolt heads so it's much stronger. Note: You may have to switch to shorter bolts depending on the Muffler hanger strap thickness you are using. Used with 07-0065/0015 type 26" long mufflers. Part # 07-0116 $4.87 Ea.
  • Out of stock
    Complete Replica 70-73 Exhaust System Replica of the Original 650 Exhaust System For 1970-73 XS1/XS1b/XS2/TX650. Features - Good Looks, Chrome finish, finned Headclamps, high quality Mufflers with original type internal components for that great original sound, Mounting hardware included. Headpipes are single thickwall type - 1.25" ID. "Best sounding system ever made for the 650" Part #07-0651 $429.00/System  
  • Out of stock
    Replica Muffler Set Replica Muffler Set - Original for XS1/XS1b/XS2/TX650 (1970-73) and also used for our later model systems #07-0749 and #07-0750. Chrome Plated. 1 each of LH and RH side. "Best sounding Mufflers ever made for the 650" Includes Joint nuts, 25 1/2" long. 94mm diameter. Part #07-0652 $244.95/set/2
  • Sale!

    Replica Headpipe Set

    $169.95
    Replica Headpipe Set
    Replica Headpipe Set - 07-0653 Original for XS1/XS1b/XS2/TX650 (1970-73) Chrome plated Replica Headpipe Set for XS1/XS1b/XS2,TX650 ( 1970-73 ) Original Bends, Finned Headpipe Clamps and heavy duty single thick wall construction - 1.25" ID x 1.5" OD. Part #07-0653 
  • Sale!
    XS Performance 1.5 " OD Headpipes
    07-0757 XS Performance Chrome 1.5 " OD Headpipes Fits: All 650's 1970-84   Part # 07-0757
  • Sale!
    Stainless Steel " 1.75" OD Headpipes 07-0758 Stainless steel 1.75 " OD Headpipes Stainless Steel XS Performance Headpipe Set - 1.75" ( 45mm.) OD x 1.65" ( 42mm.) ID x 39" Long. When Mounted the ends of the headpipes are approx. 5" past the back edge of the engine Clutch ( RH ) Cover. New Chromed OEM type Finned Headclamps included! Fits: All 650's 1970-84 Fits: to our #07-0041, 07-0015 or 07-0014 Mufflers. For maximum bottom end power these headpipes should be used with Headpipe Exhaust port Torque optimizers ( Diodes ).   Part # 07-0758
  • Sale!
    Ascot Headpipe Set for custom exhaust fabrication ( New type 2 ). Left Headpipe Passes under Engine. Right Headpipe passes under Clutch ( RH Engine cover ) Case. 42mm. OD. Headpipes Include OEM type finned headclamps. Mufflers not included. Note: Center stand must be removed to use the Headpipes. Fit: 1978-84 " Special "
  • Sale!
    2-1 XS Performance Headpipe Set   XS Performance 2-1 Chrome XS Performance Headpipe Set with Collector. 1 1/2" OD Headpipes with finned clamp and a collector pipe (45.3mm.OD) with a slight kick up.   Fits: XS650 (1980-84) Note: Muffler NOT Included. In Dyno Development this system with a free flowing muffler added and unprecedented 10HP+ rear wheel to a completely stock 1980 XS650. Designed to work with our taper Tip #07-0041 muffler or our #07-0114 short megaphone or any free flowing muffler that will fit onto the 45.3mm (1.783") OD collector. This system produces more power than any other we have tested or developed.   Part #07-0767
  • Out of stock
    Ascot Street Tracker Exhaust Ascot Street Tracker Exhaust - New Style, Good Looks & Sounds Good. Comes complete with Mount Brackets. Headpipes are 42mm.OD (1.5" ID). Chrome plated. 07-0112 mufflers with one headpipe passing under engine inside of frame.   Fits: 1978-84 "Specials"   Part #07-0770 $379.95/system
  • Out of stock
    Chrome Muffler Joint Nut Chrome Muffler Joint Nut - Threads onto Original XS1/XS1b/XS2 1970-72 & 1973.   Part #07-4621 $10.95 Ea.  
  • Out of stock
    Muffler Joint Gasket Fits into Original Muffler Joint Nut as used on Stock Mufflers on XS1/XS1b/XS2 (1970-72) and (1970-72) and 1973 TX650. Also fits to our #07-0749/0750 systems. Note: Sold Each, order quantity you require   Part #07-4622 $4.20 Ea.
  • Sale!
    Center Stand Stop Rubber. Fits: To stock muffler on 1970-73 XS/TX 650's   Part #07-4623 $4.20 Ea.
  • Out of stock
    Ring Wrench Ring Wrench to Tighten Muffler Joint Nut on Early XS1 Type Muffler   Part #35-5029 $2.95 Ea.
  • Out of stock
    XS1/2 Passenger Peg/Muffler Bolts Special Fine Thread Metric Bolt that Passes Thru Passenger Pegs, Thru Frame and Into Muffler Mountings (Pk./2 Bolts with Lock Washers) of Stock OEM Mufflers. Fits: XS1, XS1b, XS2, TX650 (1970-73).   Part #99-0679 $3.95 Pk./2
  • Out of stock
    Bolt XS1/2 Muffler to Late Frame
    Bolt XS1/2 Muffler to Late Frame. 12 x M1.25 x 30mm. Thread Length, 19mm. Head.   Part #99-0685 $2.00/pk./2

Go to Top