-
Throttle Sleeve, Nylon Replacement for Cast Stock Dual Pull Throttle Sleeve. Replaces OEM #256-26243-00. Fits: Stock 1970-75 XS/TX650 OEM Throttle Housing Assembly Part #02-2463 $7.70 Ea. -
Throttle Sleeve, Nylon Replacement for Stock Single Pull Throttle Sleeve. Replaces OEM #584-26243-00. Fits: Stock 1976-84 XS650 OEM Throttle Housing Assembly. Part #02-2465 $7.70 Ea. -
Sale!
Front Gas Tank Mount Rubber Gas Tank Mount Rubber, Front. Fits: All 650's 1970-84. Part #02-6530 $5.78/Pk./2 -
Out of stock
Rear Gas Tank Mount Rubber Gas Tank Mount Rubber, Rear. Fits: All 650's 1970-84. Part #02-6531 $7.65 Ea. -
Sale!
54mm. XS Performance Pod Filter 54mm. XS Performance Pod Filter - Tapered Oval Style with Chrome End Cap. Pod is an improved replica (Dyno & flow bench developed) of the most popular brand on the market. Features molded in internal stack, no step rubber mount flange and Chrome end cap. Filter is supplied dry but washable filtration material may be oiled for improved dust filtration. Filter body is 71mm. (2.8") deep x 74mm. (2.91") wide x 101mm. (4") high (at base). Fits: 1980-84 stock Mikuni BS34 CV Carbs + some Mikuni TM aftermarket carbs. + Fits Keihin Flatslide PWK 32mm. Carb Set for XS650. Part #15-0035 $14.95 Ea. Sale $9.95
-
Sale!
52mm. XS Performance Pod Filter. 52mm. XS Performance Pod Filter. Tapered Oval Style with Chrome End Cap. Pod fits to velocity stack on Dellorto PHF36 carbs (this combination has been shown on Dyno tests to give the most power). Pod filter is a New XS Performance item and is an improved replica (Dyno developed) of the most popular brand on the market. Chrome end cap, internal moulded stack and no step rubber mount. Pod filter is supplied dry but cotton gauze filtration material may be oiled for improved dust filtration. Fits: 1970-79 stock Mikuni BS38 CV Carbs + some Mikuni TM aftermarket carbs + Fits our XS# 48-7000 Dellorto Carb Kit. Part #15-0036 $14.95 Ea. Sale $9.95
-
Out of stock
Air Filter Air Filter - OEM Ref.# 256-14451 - Made in Japan. Fits: XS1/XS1b 1970-71 2 used per bike. Part #15-0651 $12.50 Ea.
-
Out of stock
Air Filter Air Filter - OEM Ref.# 306-14451 - Made in Japan. Fits: XS2/TX650 1972-73 2 used per bike. Part #15-0652 $14.95 Ea. -
Out of stock
Air Filter Air Filter - OEM Ref.# 533-14451-00 - Made in Japan. Fits: XS650C/D/E/SE/F/SF/2F 1976-79 2 used per bike. Part #15-0653 $27.95 Ea. -
Out of stock
Air Filter Air Filter - OEM Ref.# 447-14451-01 - Made in Japan. Fits: TX650A 1974, XS650B 1975 2 used per bike. Part #15-0654 $19.95 Ea.
-
Out of stock
Air Filter Air Filter - OEM Ref.# 3G1-14451 - Made in Japan. Fits: XS650G-K - All 1980-84 650's 2 used per bike. Part #15-0655 $19.95 Ea. -
BS34 Carb Holder Clamp BS34 Carb Holder Band Clamp - 49-55 mm. Range. Fits: Carb Holders for Stock Mikuni BS 34 CV Carbs as Used on North American 1980-84 XS650's. Part #15-0672 $3.65 Ea.
-
BS38 Carb Holder Clamp BS38 Carb Holder Band Clamp - 56-61 mm. Range. Fits Carb Holders for Stock Mikuni BS 38 CV Carbs as Used on North American 1970-79 XS/TX650's. Part #15-0673 $3.80 Ea.
-
Engine Breather Hose & Spring Engine Breather Hose & Spring - Black Vent Hose & 10" Spring. Black Vent Hose ID 13mm . 2mm wall thickness. Fits: XS650 Breather Vent Hose - All Years of XS650. Part #15-0675 $2.95/Set -
Out of stock
Reed Type PVC Valve Reed Type Positive Crankcase Ventilation Valve. Valve hooks to engine top breather vent and allows expelled air out but reed prevents air re-entering quickly so a very small vacuum is created in the crankcase. A small power increase has been noted during dyno tests (most notable on pre 1977 engines) and the crankcase vacuum helps prevent crankcase pressure from pushing oil past oil seals and case joints. Part #15-0677 $18.95 Ea. -
Breather Vent Hose Breather Vent Hose - 1 Meter (Approx. 3 Feet) Bulk Length. 2mm wall thickness. Part #15-0678 $4.95/Mettre -
Chrome Breather Filter with Mount Chrome Breather Filter with Diecast Mount Bracket and Filter Cap.
- Dimensions:
- Filter:
- Height: 49mm
- Width: 50mm
- Stem Length: 20mm
- Stem ID: 7mm
- Inlet: 3/8"
- Mount:
- Height: 12mm
- Width: 93.5mm
- Holes C to C: 56.25mm
- Filter:
- Dimensions:
-
Breather Filter Breather Filter with Rubber End. Part #15-0681 $8.40 Ea.
-
Chrome Breather Filter Breather Filter with Chrome Steel Ends. Part #15-0682 $10.95 Ea.
-
Out of stock
Carb Holder Clamps Band Clamp - 39-43mm. Range. Can be used for Carb Holders, Air Boxes, Fork Gaitors, Filters etc. Requiring this Size. Part #15-0684 $2.70/Pc.
-
Carb Holder Clamps Band Clamp - 45-49mm. Range. Fits: Keihin PWK 32 Carb holders. Part #15-0685 $2.70/Pc.
-
Out of stock
Carb Holder Clamps Band Clamp - 63-67mm. Range. Part #15-0686 $2.70/Pc.
-
Out of stock
Carb Holder Clamps
Band Clamp - 68-73mm. Range. Can be used for Carb Holders, Air Boxes, Fork Gaitors, Filters etc. Requiring this Size. Part #15-0687 $2.70/Pc. -
Intake Spiggot Gasket (Pk./2) Intake Spiggot Gasket (Carb Holder Rubber) (Pk./2), OEM Ref.# 256-13556-01. Fits: Between XS650 Manifolds (Carb Spacers) and cylinder head and between the XS manifolds and the carb holders for the PWK 32. Fits: 1970-84 650's Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650. And All Stock Carb Holders. Note: 2 sets required. Part #18-0865 $4.90/Pk./2 -
Out of stock
Fuel Line Y Fits: 1/4" - 5/16" ID fuel line. Part #20-0006 1.95/Pc. -
Fuel Line T Fuel Line T - Ideal for Linking Output from Two Fuel Petcocks into One. Fits: 1/4" - 5/16" ID fuel line. Part #20-0007 $1.90 Pc. -
Clear Square Inline Fuel Filter. Clear Square Inline Fuel Filter. Inlet to outlet Length = 63mm. Main body is 32mm. long x 14mm. x w22mm Part #20-0013 $1.90 Ea.
-
Petcock Rebuild Kit Petcock Rebuild Kit - These Petcocks Have a 3 Screw Rear Cover Plate. Kit Contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc. Rear cover Gasket (3 Screw type). Fits: TX650/A 1973-74, XS650B/C/D 1975-77. Part #20-0014 $11.95/Kit
-
Out of stock
Petcock Mount O-Ring Petcock Mount O-Ring - (Tap to Tank O-Ring) Oem Ref. # 256-24512-00 Fits: Stock Petcocks on 1970-77 650's 15 x 55 x 2mm. Part #20-0015 $2.70 Ea. -
Sealing Washers for Tap to Tank Mount Screws Sealing Washers for Tap to Tank Mount Screws. Fits: Under Mount Screws on 1970-84 650's. Part #20-0018 $1.70/Pk./2 -
Petcock - Non Vacuum Type Petcock - Non Vacuum Type to Replace 1978-84 Vacuum Type Petcocks. or to fit Standard type fuel tanks produced by Mike Lalonde prior tp 2011. 1.81" (46mm.) Center to center bolt holes - Fits Right or Left All 1978-84 North American market 650's have original petcocks operated by Vacuum from a line to the intake (on carb holder). 1978-79 models have 2 and 1980-84 models have 1 petcock. Vacuum petcocks are chronic leakers and are all getting to the point of being non-repairable. Our petcock is the Early type 650 manual petcock with a wider flange cast on it so it will fit in place of the vacuum types. Our Petcock fits to right or left and each comes with the tap to tank O-Ring seal and assorted outlet fittings (petcock has 2 outlet ports). Fittings included: 2 ninety degree, 1 Straight fitting & 1 outlet port Plug. There is an "ON", "OFF" and "Reserve" position. Part #20-0019 $35.95 Ea.
-
Tap to Tank Mount Screws Tap to Tank Mount Screws (2) and Sealing Washers (2). Fits: All 650's 1970-84. Part #20-0020 $1.99/Set
-
Petcock O-Ring O-Ring - Replacement Tap To Tank O-Ring for #20-0019 Manual Petcock. Part #20-0021 $1.95 Ea. -
Sale!Out of stock
Gas Cap with Keys Fits: 1976-79 XS650 "Standard" models and our #64-7700 Fuel Tank. Note: Caps from "Standards" and "Specials" look similar but do not interchange. Part #20-0033 $19.95 Ea.
-
Sale!Out of stock
Gas Cap with Keys Gas Cap with Keys Fits: 1978-84 650 "Specials" Note: Caps from "Standards" and "Specials" look similar but do not interchange. "Special " Models have the cap offset from the tank Center. Part #20-0034 $23.95 Ea. -
Gas Cap Rubber Seal Gas Cap Rubber Seal Fits: All 1976-84 XS650 gas caps. Part #20-0036 $6.30 Ea.
-
Out of stock
Gas Cap Rubber Seal Gas Cap Rubber Seal, OEM Ref.# 341-24612-01 Fits: All 1974-75 XS/TX 650 gas caps. Part #20-0038 $6.30 Ea. -
Petcock Rebuild kit Petcock Rebuild Kit - These Petcocks Have a 2 Screw Rear Cover Plate. Kit Contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc. Rear cover Gasket (2 Screw). Fits: XS1/XS1B/XS2 1970-72 Part #20-0049 $12.95/Kit
-
Petcock - Left Hand OEM type 1970-77 XS650 Petcock - Left Hand - Original Non-Vacuum Manual Type - (3 Screw Rear Cover). Includes: Tap to Tank O-Ring. Holes are 42.5mm Apart. OEM Ref.# 447-24500-02. Replaces All Original Left Non-Vacuum Types used on 1970-77 XS650's. This petcock will not fit 64-7702 gas tank. Part #20-0050 $29.95 Ea. -
Petcock - Right Hand OEM type 1970-77 XS650 Petcock - Right Hand - Original Non-Vacuum Manual Type - (3 Screw Rear Cover). Includes: Tap to Tank O-Ring. Replaces All Original Right Non-Vacuum Types used on 1970-77 650's This petcock will not fit 64-7702 gas tank. Part #20-0051 $29.95 Ea.
-
Out of stock
Petcock Rear Cover Gasket Petcock Rear Cover Gasket - (2 Hole) - OEM Ref.# 256-24522-00. Fits: TX/XS650's 1973-77 + our #20-0019 petcock. Part #20-0052 $1.90 Ea. -
Petcock Rear Cover Gasket Petcock Rear Cover Gasket - (3 Hole) - OEM Ref.# 447-24522-00. Fits: TX/XS650's 1973-77 + our #20-0019 petcock. Part #20-0053 $1.90 Ea. -
Gas Cap XS1/XS2/TX650 Gas Cap XS1/XS2 with Latch Lever. Part #20-0650 $29.95 Ea. -
Rubber Gas Cap Seal Rubber Gas Cap Seal for XS1/XS1b/XS2/TX650 1970-73 Part # 20-0651 $4.85 Ea. -
Black Rubber Fuel or Vent Line - (Original Thin Wall Type) 3/16" - 25'Fuel or Vent Line (4.5mm.) ID x 25' Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650. Note: Each Carb requires 1 pc.(3/16" x 11.5") to go to each fuel feed (Petcock). Part #20-4007 - 3/16" x 25' $14.95/25' Roll -
Black Rubber Fuel Line Black Rubber Fuel Line - (Original Thin Wall Type) - 1/4" ID (6mm.) x 25" Length. Part #20-4008 - 1/4" x 25' $14.95/25' Roll -
Black Rubber Fuel or Vent Line - (Original Thin Wall Type) 3/16" - 11.5"
Fuel or Vent Line (4.5mm.) ID x 11.5" Long. Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650. Note: Each Carb requires 1 pc. to go to each fuel feed (Petcock). Part #20-4009 $1.60 Pc. -
Black Rubber Fuel Line Black Rubber Fuel Line - (Original Thin Wall Type) - 1/4" ID (6mm.) x 11.5" Length. Part #20-4010 $1.60 Pc.
