-
Keihin PWK 32 Carb Set for XS650 Carb Kit # 48-9010 Original Keihin PWK 32 XS Performance Carb Kit by Heiden Tuning and Mike Lalonde. Factory modified for use on All XS650's. KIt Comes Assembled and contains the following. 2 PWK 32 Carbs ( 1 Carb with RH idle screw + 1 Carb with LH idle screw ) 2 Alloy Carb Manifolds # 48-7500 4 Pc. Carb manifold gaskets # 18-0865 2 Pk./2 Carb Manifold Bolts # 48-9034 2 Carb Holders # 48-9035 2 Blind Plugs - # 48-1447 for Carb holder Vacuum barb. 2 Pc. #15-0685 Carb Holder band clamps. 1 Pc. 2-1 Throttle Cable #51-6506 2 Pc. 54mm. Performance Pod Air Filters # 15-0035 2 Pc. #35 Pilot Jet #48-9042 installed as Standard size. 2 Pc. #130 Main Jet #48-9063 installed as Standard size. 2 Pc. #40 Pilot Jet #48-9043 " Optional " Jet. 2 Pc. #125 Main Jet #48-9062 " Optional " Jet. 2 Pc # 48-9028 Chrome Throttle Valve ( Slide) Part # 48-9010 $250.00/Kit Assembled -
Out of stock
Carb Slide & Diaphragm Assembly Carb Slide & Diaphragm Assembly. OEM Ref.# 3F7/3H5-14940 - Mikuni Genuine. Fits: Mikuni BS34 CV Carbs as used on 1980-84 XS650's. Part #20-6028 $69.90 Ea. -
Out of stock
Carb Slide & Diaphragm Assembly Carb Slide & Diaphragm Assembly. OEM Ref.# 256-14940-00 - Mikuni Genuine. Fits: Mikuni BS38 CV Carbs as used on 1970-77 XS/TX 650's. Part #20-6029 $69.90 Ea. -
Out of stock
Carb Holder Kit - Mikuni BS38 1970-73 Carb Holders with Air Barbs- Kit - Fits: Stock Mikuni BS38 CV Carburetors on 1970-73 XS1/XS1b/XS2/TX650 - Kit Includes 2 intake manifold gaskets #18-0865 + 2 pc.Carb Holders - Oem Ref.# 256-13565-00 ( Fits:Right or Left + 2 pc. 48-1447 Blind Plug + 2 Pc. Holder Clamp #15-0673. Part #48-1479 $64.95/Kit -
Precision Carb Sync Gauges Dual Carb Sync Gauge Set with Built in Adjustable Pulse Dampers Mounted on Bracket and with Hoses. Precision Diaphragm type gauge set originally designed for Professional Motorcycle shop use in Japan. Note: Sync gauges hoses hook up to carb holder vacuum air barbs (not included). Your bike must have these air barbs in order to use this sync tool. Part #35-1388 $49.95/Set -
Out of stock
Carb Holder Kit - Mikuni BS38 1970-73 Carb Holders with Air Barbs- Kit - Fits: Stock Mikuni BS38 CV Carburetors on 1970-73 XS1/XS1b/XS2/TX650 - Kit Includes 2 intake manifold gaskets #18-0865 + 2 pc.Carb Holders - Oem Ref.# 256-13565-00 ( Fits:Right or Left + 2 pc. 48-1447 Blind Plug + 2 Pc. Holder Clamp #15-0673. Part # 48-1478 $49.95/Set/2 - Holders Only
-
Throttle Cable (Black) Fits: 1976-84 Stock Throttle to Mikuni VM 34/36/38mm. Non CV aftermarket carburetors. 2-1 type design, machined steel junction box. - Quality made in Japan. Also fits XS Performance Keihin PWK 32 Carb Kit (Part # 48-9010 ) - Replacement 2-1 Throttle cable for for XS650. Japanese made superior quality. Part #51-6506 $39.50 Ea. -
BS34/VM34-38 Carb Holder Set Carb Holder Set Fits: Delorto PHF36 Carbs, BS34 Mikuni on 80-84, VM34/36/38 Aftermarket Carbs Kit Includes 2 intake manifold gaskets. They have the lip about 4mm from the edge of boot . Part #20-6038 $38.95/Set -
Petcock - Non Vacuum Type Petcock - Non Vacuum Type to Replace 1978-84 Vacuum Type Petcocks. or to fit Standard type fuel tanks produced by Mike Lalonde prior tp 2011. 1.81" (46mm.) Center to center bolt holes - Fits Right or Left All 1978-84 North American market 650's have original petcocks operated by Vacuum from a line to the intake (on carb holder). 1978-79 models have 2 and 1980-84 models have 1 petcock. Vacuum petcocks are chronic leakers and are all getting to the point of being non-repairable. Our petcock is the Early type 650 manual petcock with a wider flange cast on it so it will fit in place of the vacuum types. Our Petcock fits to right or left and each comes with the tap to tank O-Ring seal and assorted outlet fittings (petcock has 2 outlet ports). Fittings included: 2 ninety degree, 1 Straight fitting & 1 outlet port Plug. There is an "ON", "OFF" and "Reserve" position. Part #20-0019 $35.95 Ea. -
Carb Holder Set - PWK 32 Carb Holder Set (2) for XS Performance Keihin PWK Flatslide Carb Kit. Fits: Keihin Flatslide PWK 32mm. XS Performance Carb Set for XS650. Note: Made with Ethanol resistant material. Part #48-9035 $32.95/Set/2 -
Carb Holder Spacer Set Alloy Carb Holder Spacer Set for PWK32 and Delortto PHF 36 carbs. Fits to any XS650 Head and improves throttle responce and low end power. Developed to provide maximum low end torque with PHF 36 carbs and Keihin PWK 32 carb kit. Part #48-7500 $29.95 Set/2 -
Petcock - Right Hand OEM type 1970-77 XS650 Petcock - Right Hand - Original Non-Vacuum Manual Type - (3 Screw Rear Cover). Includes: Tap to Tank O-Ring. Replaces All Original Right Non-Vacuum Types used on 1970-77 650's This petcock will not fit 64-7702 gas tank. Part #20-0051 $29.95 Ea. -
Petcock - Left Hand OEM type 1970-77 XS650 Petcock - Left Hand - Original Non-Vacuum Manual Type - (3 Screw Rear Cover). Includes: Tap to Tank O-Ring. Holes are 42.5mm Apart. OEM Ref.# 447-24500-02. Replaces All Original Left Non-Vacuum Types used on 1970-77 XS650's. This petcock will not fit 64-7702 gas tank. Part #20-0050 $29.95 Ea. -
Gas Cap XS1/XS2/TX650 Gas Cap XS1/XS2 with Latch Lever. Part #20-0650 $29.95 Ea. -
Out of stock
Air Filter Air Filter - OEM Ref.# 533-14451-00 - Made in Japan. Fits: XS650C/D/E/SE/F/SF/2F 1976-79 2 used per bike. Part #15-0653 $27.95 Ea.
-
Out of stock
Carb Holder Kit - Mikuni BS38 1974-79 Carb Holder Set Product Photo Carb Holder Set Fits: Stock Mikuni BS38 CV Carburetors on TX650A 1974 & XS650B/C/D (1975-77) & XS650 (78-79 ) Kit Includes 2 intake manifold gaskets, 1pc.(RH) #447-13565 & 1pc.(LH) #447-13555 Part #48-1480 $27.95/Set
