• Blind Plug Blind Plug - Carb Holder Air Barb - OEM Ref.# 1J7-13569-00. Fits: 1978-84 XS650 stock carb holders & blocks off air barbs when vacuum petcocks are replaced with manual type petcocks. Order quantity needed. Fits: All XS Carb Holders and Carb Holders for Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650. Note: Each carb holder requires 1 Blind Plug.   Part #48-1447 $0.90 Ea.
  • Black Rubber Fuel Line Black Rubber Fuel Line - (Original Thin Wall Type) - 1/4" ID (6mm.) x 11.5" Length.   Part #20-4010 $1.60 Pc.
  • Black Rubber Fuel or Vent Line - (Original Thin Wall Type) 3/16" - 11.5"
    Fuel or Vent Line (4.5mm.) ID x 11.5" Long. Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650. Note: Each Carb requires 1 pc. to go to each fuel feed (Petcock).   Part #20-4009 $1.60 Pc.
  • Sealing Washers for Tap to Tank Mount Screws Sealing Washers for Tap to Tank Mount Screws. Fits: Under Mount Screws on 1970-84 650's.   Part #20-0018 $1.70/Pk./2
  • Petcock Fuel Pipe Filter Set Petcock Fuel Pipe Filter Set (2). These go over petcock fuel pipes up inside gas tank. Will fit our replacement petcocks for 1970-1977 stock petcocks (does not fit OEM).   Part #20-6419 $1.90/Pr.
  • Petcock Rear Cover Gasket Petcock Rear Cover Gasket - (3 Hole) - OEM Ref.# 447-24522-00. Fits: TX/XS650's 1973-77 + our #20-0019 petcock.   Part #20-0053 $1.90 Ea.
  • Out of stock
    Petcock Rear Cover Gasket Petcock Rear Cover Gasket - (2 Hole) - OEM Ref.# 256-24522-00. Fits: TX/XS650's 1973-77 + our #20-0019 petcock.     Part #20-0052 $1.90 Ea.
  • Fuel Line T Fuel Line T - Ideal for Linking Output from Two Fuel Petcocks into One. Fits: 1/4" - 5/16" ID fuel line.   Part #20-0007 $1.90 Pc.
  • Clear Square Inline Fuel Filter. Clear Square Inline Fuel Filter.   Part #20-0013 $1.90 Ea.
  • Petcock O-Ring O-Ring - Replacement Tap To Tank O-Ring for #20-0019 Manual Petcock. Part #20-0021 $1.95 Ea.
  • Out of stock
    Fuel Line Y Fits: 1/4" - 5/16" ID fuel line.   Part #20-0006 1.95/Pc.  
  • Tap to Tank Mount Screws Tap to Tank Mount Screws (2) and Sealing Washers (2). Fits: All 650's 1970-84.   Part #20-0020 $1.99/Set
  • Wire Hose Clamps Wire Spring type Hose Clamp. 5/16" (8mm.) inside Diameter size (unexpanded) in packs of 10pc. Suitable for matching fuel or vent hose. Part #20-4016 $2.40 Pk./10
  • Wire Hose Clamps Wire Spring Type Hose Clamps 0.35" (9mm.) inside Diameter size (unexpanded) in packs of 10pc. Best Size to fit Standard XS petcocks using 20-4009/10 black rubber fuel line.   Part #20-4017 $2.50 Pk./10
  • Wire Hose Clamps Wire Spring type Hose Clamp. 1/4" (6mm.) inside Diameter size (unexpanded) in packs of 10pc. Suitable for matching small fuel or vent hose. Part #20-4014 $2.50 Pk./10
  • Wire Hose Clamps Wire Spring Type Hose Clamp. 3/16" (4mm) inside Diameter size (unexpanded) in packs of 10pc. Suitable for small carb vent hose.   Part #20-4012 $2.50/Pk./10
  • Petcock Mount O-Ring Petcock Mount O-Ring - (Tap to Tank O-Ring) Oem Ref. # 256-24512-00 Fits: Stock Petcocks on 1970-77 650's 15 x 55 x 2mm.   Part #20-0015 $2.70 Ea.
  • Out of stock
    Petcock 90 Degree Outlet Fitting Petcock 90 Degree Outlet Fitting - Replacement Fitting - Fits: XS650 Petcocks - #20-0019/0050/0051 - Use as Required (Not Original on 20-0050/20-0051 Petcocks).   Part #20-6420 $2.95 Ea.
  • Replacement Seals Replacement for #48-0884 T Piece.ent seals ( Pk./2 ). Part # 48-0885 $3.50/Pk./2
  • Out of stock
    Carb Link Bar Screws BS34/38 Carb Link Bar Screws - Set/4 Stainless Socket head screws - 6mm. x 13mm. x M1.00 ( Max 15mm. )   Part # 48-0989 $3.90/Set/4
  • Out of stock
    Petcock Filter with Attached Filter Screen. Petcock Filter with Attached Filter Screen. Check thread size - Fits: Original Yamaha Manual Petcocks 1970-77 and (#20-0050/51) Only.   Part #20-6421 $3.95 Ea.
  • Sale!
    Front Gas Tank Mount Rubber Gas Tank Mount Rubber, Front. Fits: All 650's 1970-84. Part #02-6530 $5.78/Pk./2
  • Rubber Gas Cap Seal Rubber Gas Cap Seal for XS1/XS1b/XS2/TX650 1970-73   Part # 20-0651 $4.85 Ea.
  • Gas Cap Rubber Seal Gas Cap Rubber Seal Fits: All 1976-84 XS650 gas caps.   Part #20-0036 $6.30 Ea.
  • Out of stock
    Gas Cap Rubber Seal Gas Cap Rubber Seal, OEM Ref.# 341-24612-01 Fits: All 1974-75 XS/TX 650 gas caps.   Part #20-0038 $6.30 Ea.
  • Out of stock
    Rear Gas Tank Mount Rubber Gas Tank Mount Rubber, Rear. Fits: All 650's 1970-84.   Part #02-6531 $7.65 Ea.
  • Petcock Rebuild Kit Petcock Rebuild Kit - These Petcocks Have a 3 Screw Rear Cover Plate. Kit Contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc. Rear cover Gasket (3 Screw type). Fits: TX650/A 1973-74, XS650B/C/D 1975-77. Part #20-0014 $11.95/Kit
  • Out of stock
    Sale!
    Gas Cap with Keys Fits: 1976-79 XS650 "Standard" models and our #64-7700 Fuel Tank. Note: Caps from "Standards" and "Specials" look similar but do not interchange. Part #20-0033 $19.95 Ea.
  • Petcock Rebuild kit Petcock Rebuild Kit - These Petcocks Have a 2 Screw Rear Cover Plate. Kit Contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc. Rear cover Gasket (2 Screw). Fits: XS1/XS1B/XS2 1970-72 Part #20-0049 $12.95/Kit
  • Sale!
    Black Rubber Fuel or Vent Line - (Original Thin Wall Type) 3/16" - 25'
    Fuel or Vent Line (4.5mm.) ID x 25' Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650. Note: Each Carb requires 1 pc.(3/16" x 11.5") to go to each fuel feed (Petcock). Part #20-4007 - 3/16" x 25'    $14.95/25' Roll
  • Fuel Line T Piece Fuel Line T Piece ( Fuel Supply T that fits between Carbs ) Replaces Stock piece on Mikuni BS 34 CV carbs as used on 80-84 XS650's Includes 2 Rubber Seals. Note: T piece replaces the stock plastic or Pot metal Original. The Carbs must be separated to install the T- Piece. Inspect the carb body holes as some are off center or have an irregulat tapered hole which makes it hard to seal. We suggest you replace the Carb link bar screws as they are very hard to get out and may be distorted.   Part # 48-0884 $9.90/Kit
  • Sale!
    Black Rubber Fuel Line Black Rubber Fuel Line - (Original Thin Wall Type) - 1/4" ID (6mm.) x 25" Length.   Part #20-4008 - 1/4" x 25' $14.95/25' Roll
  • Out of stock
    Sale!
    Gas Cap with Keys Gas Cap with Keys Fits: 1978-84 650 "Specials" Note: Caps from "Standards" and "Specials" look similar but do not interchange. "Special " Models have the cap offset from the tank Center.   Part #20-0034 $23.95 Ea.
  • Sale!
    Petcock - Left Hand OEM type 1970-77 XS650 Petcock - Left Hand - Original Non-Vacuum Manual Type - (3 Screw Rear Cover). Includes: Tap to Tank O-Ring. Holes are 42.5mm Apart. OEM Ref.# 447-24500-02. Replaces All Original Left Non-Vacuum Types used on 1970-77 XS650's. This petcock will not fit 64-7702 gas tank.   Part #20-0050 $29.95 Ea.
  • Sale!
    Petcock - Right Hand OEM type 1970-77 XS650 Petcock - Right Hand - Original Non-Vacuum Manual Type - (3 Screw Rear Cover). Includes: Tap to Tank O-Ring. Replaces All Original Right Non-Vacuum Types used on 1970-77 650's This petcock will not fit 64-7702 gas tank.   Part #20-0051 $29.95 Ea.
  • Gas Cap XS1/XS2/TX650 Gas Cap XS1/XS2 with Latch Lever.   Part #20-0650 $29.95 Ea.
  • Petcock - Non Vacuum Type Petcock - Non Vacuum Type to Replace 1978-84 Vacuum Type Petcocks. or to fit Standard type fuel tanks produced by Mike Lalonde prior tp 2011. 1.81" (46mm.) Center to center bolt holes - Fits Right or Left All 1978-84 North American market 650's have original petcocks operated by Vacuum from a line to the intake (on carb holder). 1978-79 models have 2 and 1980-84 models have 1 petcock. Vacuum petcocks are chronic leakers and are all getting to the point of being non-repairable. Our petcock is the Early type 650 manual petcock with a wider flange cast on it so it will fit in place of the vacuum types. Our Petcock fits to right or left and each comes with the tap to tank O-Ring seal and assorted outlet fittings (petcock has 2 outlet ports). Fittings included: 2 ninety degree, 1 Straight fitting & 1 outlet port Plug. There is an "ON", "OFF" and "Reserve" position.   Part #20-0019 $35.95 Ea.

Go to Top