-
Sale!Front Gas Tank Mount Rubber Gas Tank Mount Rubber, Front. Fits: All 650's 1970-84. Part #02-6530 $5.78/Pk./2
-
Out of stockRear Gas Tank Mount Rubber Gas Tank Mount Rubber, Rear. Fits: All 650's 1970-84. Part #02-6531 $7.65 Ea.
-
Out of stock
Fuel Line Y Fits: 1/4" - 5/16" ID fuel line. Part #20-0006 1.95/Pc. -
Petcock Rebuild Kit Petcock Rebuild Kit - These Petcocks Have a 3 Screw Rear Cover Plate. Kit Contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc. Rear cover Gasket (3 Screw type). Fits: TX650/A 1973-74, XS650B/C/D 1975-77. Part #20-0014 $11.95/Kit
-
Petcock - Non Vacuum Type Petcock - Non Vacuum Type to Replace 1978-84 Vacuum Type Petcocks. or to fit Standard type fuel tanks produced by Mike Lalonde prior tp 2011. 1.81" (46mm.) Center to center bolt holes - Fits Right or Left All 1978-84 North American market 650's have original petcocks operated by Vacuum from a line to the intake (on carb holder). 1978-79 models have 2 and 1980-84 models have 1 petcock. Vacuum petcocks are chronic leakers and are all getting to the point of being non-repairable. Our petcock is the Early type 650 manual petcock with a wider flange cast on it so it will fit in place of the vacuum types. Our Petcock fits to right or left and each comes with the tap to tank O-Ring seal and assorted outlet fittings (petcock has 2 outlet ports). Fittings included: 2 ninety degree, 1 Straight fitting & 1 outlet port Plug. There is an "ON", "OFF" and "Reserve" position. Part #20-0019 $35.95 Ea.
-
Out of stockGas Cap with Keys Fits: 1976-79 XS650 "Standard" models and our #64-7700 Fuel Tank. Note: Caps from "Standards" and "Specials" look similar but do not interchange. Part #20-0033 $19.95 Ea.
-
Out of stockGas Cap with Keys Gas Cap with Keys Fits: 1978-84 650 "Specials" Note: Caps from "Standards" and "Specials" look similar but do not interchange. "Special " Models have the cap offset from the tank Center. Part #20-0034 $23.95 Ea.
-
Out of stockGas Cap Rubber Seal Gas Cap Rubber Seal, OEM Ref.# 341-24612-01 Fits: All 1974-75 XS/TX 650 gas caps. Part #20-0038 $6.30 Ea.
-
Petcock Rebuild kit Petcock Rebuild Kit - These Petcocks Have a 2 Screw Rear Cover Plate. Kit Contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc. Rear cover Gasket (2 Screw). Fits: XS1/XS1B/XS2 1970-72 Part #20-0049 $12.95/Kit
-
Sale!Petcock - Left Hand OEM type 1970-77 XS650 Petcock - Left Hand - Original Non-Vacuum Manual Type - (3 Screw Rear Cover). Includes: Tap to Tank O-Ring. Holes are 42.5mm Apart. OEM Ref.# 447-24500-02. Replaces All Original Left Non-Vacuum Types used on 1970-77 XS650's. This petcock will not fit 64-7702 gas tank. Part #20-0050 $29.95 Ea.
-
Sale!Petcock - Right Hand OEM type 1970-77 XS650 Petcock - Right Hand - Original Non-Vacuum Manual Type - (3 Screw Rear Cover). Includes: Tap to Tank O-Ring. Replaces All Original Right Non-Vacuum Types used on 1970-77 650's This petcock will not fit 64-7702 gas tank. Part #20-0051 $29.95 Ea.
-
Out of stockPetcock Rear Cover Gasket Petcock Rear Cover Gasket - (2 Hole) - OEM Ref.# 256-24522-00. Fits: TX/XS650's 1973-77 + our #20-0019 petcock. Part #20-0052 $1.90 Ea.
-
Sale!Black Rubber Fuel or Vent Line - (Original Thin Wall Type) 3/16" - 25'
Fuel or Vent Line (4.5mm.) ID x 25' Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650. Note: Each Carb requires 1 pc.(3/16" x 11.5") to go to each fuel feed (Petcock). Part #20-4007 - 3/16" x 25' $14.95/25' Roll -
Sale!
Black Rubber Fuel Line Black Rubber Fuel Line - (Original Thin Wall Type) - 1/4" ID (6mm.) x 25" Length. Part #20-4008 - 1/4" x 25' $14.95/25' Roll -
Out of stockPetcock 90 Degree Outlet Fitting Petcock 90 Degree Outlet Fitting - Replacement Fitting - Fits: XS650 Petcocks - #20-0019/0050/0051 - Use as Required (Not Original on 20-0050/20-0051 Petcocks). Part #20-6420 $2.95 Ea.
-
Out of stockPetcock Filter with Attached Filter Screen. Petcock Filter with Attached Filter Screen. Check thread size - Fits: Original Yamaha Manual Petcocks 1970-77 and (#20-0050/51) Only. Part #20-6421 $3.95 Ea.
-
Fuel Line T Piece Fuel Line T Piece ( Fuel Supply T that fits between Carbs ) Replaces Stock piece on Mikuni BS 34 CV carbs as used on 80-84 XS650's Includes 2 Rubber Seals. Note: T piece replaces the stock plastic or Pot metal Original. The Carbs must be separated to install the T- Piece. Inspect the carb body holes as some are off center or have an irregulat tapered hole which makes it hard to seal. We suggest you replace the Carb link bar screws as they are very hard to get out and may be distorted. Part # 48-0884 $9.90/Kit
-
Out of stock
Carb Link Bar Screws BS34/38 Carb Link Bar Screws - Set/4 Stainless Socket head screws - 6mm. x 13mm. x M1.00 ( Max 15mm. ) Part # 48-0989 $3.90/Set/4 -
Blind Plug Blind Plug - Carb Holder Air Barb - OEM Ref.# 1J7-13569-00. Fits: 1978-84 XS650 stock carb holders & blocks off air barbs when vacuum petcocks are replaced with manual type petcocks. Order quantity needed. Fits: All XS Carb Holders and Carb Holders for Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650. Note: Each carb holder requires 1 Blind Plug. Part #48-1447 $0.90 Ea.