• Sale!
    54mm. XS Performance Pod Filter 54mm. XS Performance Pod Filter - Tapered Oval Style with Chrome End Cap. Pod is an improved replica (Dyno & flow bench developed) of the most popular brand on the market. Features molded in internal stack, no step rubber mount flange and Chrome end cap. Filter is supplied dry but washable filtration material may be oiled for improved dust filtration. Filter body is 71mm. (2.8") deep x 74mm. (2.91") wide x 101mm. (4") high (at base).   Fits: 1980-84 stock Mikuni BS34 CV Carbs + some Mikuni TM aftermarket carbs. + Fits Keihin Flatslide PWK 32mm. Carb Set for XS650.   Part #15-0035 $14.95 Ea. Sale $9.95
  • Carb Holder Clamps Band Clamp - 45-49mm. Range. Fits: Keihin PWK 32 Carb holders. Part #15-0685 $2.70/Pc.
  • Intake Spiggot Gasket (Pk./2) Intake Spiggot Gasket (Carb Holder Rubber) (Pk./2), OEM Ref.# 256-13556-01. Fits: Between XS650 Manifolds (Carb Spacers) and cylinder head and between the XS manifolds and the carb holders for the PWK 32. Fits: 1970-84 650's Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650. And All Stock Carb Holders. Note: 2 sets required. Part #18-0865 $4.90/Pk./2
  • Clear Square Inline Fuel Filter. Clear Square Inline Fuel Filter.   Part #20-0013 $1.90 Ea.
  • Black Rubber Fuel or Vent Line - (Original Thin Wall Type) 3/16" - 11.5"
    Fuel or Vent Line (4.5mm.) ID x 11.5" Long. Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650. Note: Each Carb requires 1 pc. to go to each fuel feed (Petcock).   Part #20-4009 $1.60 Pc.
  • Blind Plug Blind Plug - Carb Holder Air Barb - OEM Ref.# 1J7-13569-00. Fits: 1978-84 XS650 stock carb holders & blocks off air barbs when vacuum petcocks are replaced with manual type petcocks. Order quantity needed. Fits: All XS Carb Holders and Carb Holders for Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650. Note: Each carb holder requires 1 Blind Plug.   Part #48-1447 $0.90 Ea.
  • Carb Holder Spacer Set Alloy Carb Holder Spacer Set for PWK32 and Delortto PHF 36 carbs. Fits to any XS650 Head and improves throttle responce and low end power. Developed to provide maximum low end torque with PHF 36 carbs and Keihin PWK 32 carb kit.   Part #48-7500 $29.95 Set/2
  • Keihin PWK 32 Carb Set for XS650 Carb Kit # 48-9010 Original Keihin PWK 32 XS Performance Carb Kit by Heiden Tuning and Mike Lalonde. Factory modified for use on All XS650's. KIt Comes Assembled and contains the following. 2 PWK 32 Carbs ( 1 Carb with RH idle screw + 1 Carb with LH idle screw ) 2 Alloy Carb Manifolds # 48-7500 4 Pc. Carb manifold gaskets # 18-0865 2 Pk./2 Carb Manifold Bolts # 48-9034 2 Carb Holders # 48-9035 2 Blind Plugs - # 48-1447 for Carb holder Vacuum barb. 2 Pc. #15-0685 Carb Holder band clamps. 1 Pc. 2-1 Throttle Cable #51-6506 2 Pc. 54mm. Performance Pod Air Filters # 15-0035 2 Pc. #35 Pilot Jet #48-9042 installed as Standard size. 2 Pc. #130 Main Jet #48-9063 installed as Standard size. 2 Pc. #40 Pilot Jet #48-9043 " Optional " Jet. 2 Pc. #125 Main Jet #48-9062 " Optional " Jet.   Part # 48-9010 $250.00/Kit Assembled
  • Drain Plug O-Ring O-Ring for Float Bowl Drain Plug Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs.   Part #48-9021 $0.95 Ea.
  • Carb Slide Top Gasket Gasket for Carb Top (Slide) Cover. Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.   Part #48-9022 $0.95 Ea.
  • Float Needle with clip Float Needle with Clip. Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.   Part #48-9023 $2.90/2 Pc. Set
  • Jet Block O-Ring Jet Block Main Gasket (O-Ring Assy.) Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.   Part #48-9024 $0.90 Ea.
  • Jet Block Mounting Screws Mounting Screws (Pk/2) for Jet Block Mounting. Special 4mm. x M0.7 x 10mm. long with T-20 Torx head. Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.   Part #48-9025 $0.90/Pk./2
  • Main Jet Holder ( Needle Jet )
    Main Jet Holder ( Needle Jet ) 021-581 for Keihin PWK 32. Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.   Part #48-9026 $5.60 Ea.
  • Chrome Throttle Valve (Slide) Chrome #3.5 Throttle Valve (Slide) for Keihin XS 32mm. PWK Performance Carb. NOTE: Standard type shown.   Fits: Keihin Flatslide PWK 32mm. XS Carb Set. Note: Must be bought in pairs as they must have matched Idle adjustment notches.   Part #48-9028 $13.90 /Pr.
  • Throttle Spring/Cable Plastic Collar Plastic Cable/Spring Collar - Retains/Guides Throttle Spring and Cable at Carb Slide. Fits: Keihin Flatslide PWK 32mm. XS Performance Carb.   Part #48-9029 $0.80 Ea.

Go to Top