Home/Fuel System
  • Carb Choke Lever Kit Replacement Choke Lever Assembly for the Stock Mikuni BS38 CV Carbs as Used on all 1972-79 TX/XS650's.   Part #48-0777 $12.95/Kit
  • Float Bowl Drain Screw with O-Ring Float Bowl Drain Screw with O-Ring - Screw OEM Ref.# 2L1-14191-00-00 Fits: 1980-84 Stock 34mm. Mikuni CV Carbs.   Part #48-0778 $3.90 Ea.
  • Float Bowl Drain Plug Float Bowl Drain Plug. OEM Ref.# 256-14991-00-00 Fits: 1970-79 Stock 38mm Mikuni CV Carbs.   Part #48-0779 $2.95 Ea.
  • Fuel Line T Piece Fuel Line T Piece ( Fuel Supply T that fits between Carbs ) Replaces Stock piece on Mikuni BS 34 CV carbs as used on 80-84 XS650's Includes 2 Rubber Seals. Note: T piece replaces the stock plastic or Pot metal Original. The Carbs must be separated to install the T- Piece. Inspect the carb body holes as some are off center or have an irregulat tapered hole which makes it hard to seal. We suggest you replace the Carb link bar screws as they are very hard to get out and may be distorted.   Part # 48-0884 $9.90/Kit
  • Replacement Seals Replacement for #48-0884 T Piece.ent seals ( Pk./2 ). Part # 48-0885 $3.50/Pk./2
  • Out of stock
    Carb Link Bar Screws BS34/38 Carb Link Bar Screws - Set/4 Stainless Socket head screws - 6mm. x 13mm. x M1.00 ( Max 15mm. )   Part # 48-0989 $3.90/Set/4
  • Float Bowl Screws (Pk./4) Early 5mm. Mikuni BS38 CV Carb Lid Screws with Lock Washers and Late 34mm CV Bowl Screw Pk/4.   Part #48-0991 $2.70/Set
  • Carb Lid Screws - 5mm. Screws - 5mm. (No Lock Washers) Late Mikuni CV Carb Lid Screw - Pk./4.   Part #48-0992 $1.90/Pk./4
  • Float Bowl Screws
    Float Bowl Screws - 4mm. - (Pk./4 Screws with Lock Washers). Fits: Early Mikuni CV Carb Float Bowls.   Part #48-0993 $1.90/Set
  • Carb Rebuild Kit
    Carb Rebuild Kit Kit Contains : Push-in Float Valve assembly with O-Ring, Carb rubber passage Plug & Float bowl Gasket 3F7. Made in Japan - 1 kit required per carb. Fits: XS650SG-SL (1980-84) stock Mikuni 34mm CV carbs.   Part #48-1408 $10.50/Kit
  • Carb Float Valve (Needle & Seat) Carb Float Valve (Needle & Seat) - Threaded Type. Fits: XS1/XS1b (1970-71) 650's.   Part #48-1429 $5.60 Ea.
  • Carb Float Valve (Needle & Seat) Carb Float Valve (Needle & Seat) - Push in Type With O-Ring Seal, Needle & Clip. Fits: XS650G/H/SH/SJ/SK/SL (1980-84) Stock Mikuni BS34 CV carbs.   Part #48-1445 $8.95/Set
  • Blind Plug Blind Plug - Carb Holder Air Barb - OEM Ref.# 1J7-13569-00. Fits: 1978-84 XS650 stock carb holders & blocks off air barbs when vacuum petcocks are replaced with manual type petcocks. Order quantity needed. Fits: All XS Carb Holders and Carb Holders for Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650. Note: Each carb holder requires 1 Blind Plug.   Part #48-1447 $0.90 Ea.
  • Out of stock
    Carb Holder Kit - Mikuni BS38 1970-73 Carb Holders with Air Barbs- Kit - Fits: Stock Mikuni BS38 CV Carburetors on 1970-73 XS1/XS1b/XS2/TX650 - Kit Includes 2 intake manifold gaskets #18-0865 + 2 pc.Carb Holders - Oem Ref.# 256-13565-00 ( Fits:Right or Left + 2 pc. 48-1447 Blind Plug + 2 Pc. Holder Clamp #15-0673.   Part # 48-1478 $49.95/Set/2 - Holders Only
  • Out of stock
    Carb Holder Kit - Mikuni BS38 1970-73 Carb Holders with Air Barbs- Kit - Fits: Stock Mikuni BS38 CV Carburetors on 1970-73 XS1/XS1b/XS2/TX650 - Kit Includes 2 intake manifold gaskets #18-0865 + 2 pc.Carb Holders - Oem Ref.# 256-13565-00 ( Fits:Right or Left + 2 pc. 48-1447 Blind Plug + 2 Pc. Holder Clamp #15-0673.   Part #48-1479 $64.95/Kit
  • Out of stock
    Carb Holder Kit - Mikuni BS38 1974-79 Carb Holder Set Product Photo Carb Holder Set Fits: Stock Mikuni BS38 CV Carburetors on TX650A 1974 & XS650B/C/D (1975-77) & XS650 (78-79 )   Kit Includes 2 intake manifold gaskets, 1pc.(RH) #447-13565 & 1pc.(LH) #447-13555   Part #48-1480 $27.95/Set
Go to Top