• Throttle Sleeve, Nylon Replacement for Cast Stock Dual Pull Throttle Sleeve. Replaces OEM #256-26243-00. Fits: Stock 1970-75 XS/TX650 OEM Throttle Housing Assembly   Part #02-2463 $7.70 Ea.
  • Throttle Sleeve, Nylon Replacement for Stock Single Pull Throttle Sleeve. Replaces OEM #584-26243-00. Fits: Stock 1976-84 XS650 OEM Throttle Housing Assembly.   Part #02-2465 $7.70 Ea.
  • Cable Luber - Yamaha Pressure Type (Sold Each) Water & dirt are blown down cable by lubricant when pressure spray can nozzle is applied. Spray lube sold by most bike shops. Part #35-0108 $6.95 Ea.
  • Throttle Cable (Black), OEM# 2M0-26311-01, Made in Japan. Fits: XS650 "Specials" 1978-84   Part #51-3502 $12.75 Ea.
  • Throttle Cable (Grey) Right side cable, OEM # 256-26311-01, Made in Japan. Fits: XS1/XS1B/XS2/TX650 (1970-73)   Part #51-3506 $12.75 Ea.
  • Throttle Cable (Grey) Left side cable, OEM # 256-26311-01, Made in Japan. Fits: XS1/XS1B/XS2/TX650 (1970-73)   Part #51-3507  $12.75 Ea.
  • Throttle Cable (Black) Right side, OEM# 447-26311-00, Made in Japan. Fits: TX650A (1974), XS650B (1975)   Part #51-3509 $13.10 Ea.
  • Throttle Cable (Black) Left side, OEM# 447-26312-00, Made in Japan. Fits: TX650A (1974), XS650B (1975)   Part #51-3510 $12.75 Ea.
  • Out of stock
    Throttle Cable (Black), OEM# 584-26311-10, Made in Japan. Fits: XS650C/D/E/F (1976-79) Standard models and will also fit 1978-84 "Specials" with lower bars.   Part #51-3511 $9.80 Ea.
  • Throttle Cable (Black) Fits: 1976-84 Stock Throttle to Mikuni VM 34/36/38mm. Non CV aftermarket carburetors. 2-1 type design, machined steel junction box. - Quality made in Japan. Also fits XS Performance Keihin PWK 32 Carb Kit (Part # 48-9010 ) - Replacement 2-1 Throttle cable for for XS650. Japanese made superior quality. Part #51-6506 $39.50 Ea.
  • 2 to 1 Cable Junction Box ( 1 cable in - 2 cables out ) Round Steel Junction with thread on top cap and Nylon inner slide/Junction. For Custom Cable Building Upper Single inlet fits a 6mm. OD. outer cable Lower Dual outlet fits two outer cables of 5mm. OD. Note: Cable Box must be crimped to retain outer cable ends once they are fitted to the junction box.   Part #51-6508 $16.75 Ea.
  • Retainer Clip - Holds Throttle Cable to Throttle Housing Fits: 1970-75 650's with dual throttle cables.   Part #51-6515 $2.30 Ea.
  • Retainer Clip for Single type throttle cable. Holds Throttle Cable to Throttle Housing Fits: 1977-84 650's with single throttle cables.   Part #51-6517 $2.25 Ea.
  • Out of stock
    Extended Throttle Cable - (Black) Throttle - Same as Throttle Cable #51-3502 but + 350mm.(13.75") in length. Fits: Custom High bar applications for XS650's (1978-84). Note: Soldering required and length difference between inner and outer cables must be kept the same as stock cables.   Part #51-9502 $15.20 Ea.
  • Out of stock
    Extended Throttle Cable - (Black) Throttle - Same as Throttle cable #51-3510 (RH throttle cable to fit TX650A/XS650B (1974-75) but + 350mm. (13.75") in length. Total outer cable casing length including throttle end adjuster fitting is approx 56.75" (1441mm.). Cut the outer cable to the desired length, crimp on the casing ferule, trim the inner cable to length and then solder on the carb end cable nipple (ferule and end nipple included in pack). Fits: Custom High bar applications (RH side) for TX650A/XS650B (1974-75). Note: Soldering required and length difference between inner and outer cables must be kept same as stock cables.   Part #51-9509 $14.75 Ea.
  • Out of stock
    Extended Throttle Cable - (Black) Throttle - Same as Throttle cable #51-3510 (LH throttle cable to fit TX650A/XS650B (1974-75) but + 350mm (13.75") in length). Total outer cable casing length including throttle end adjuster fitting is approx 56.75" (1441mm). Cut the outer cable to the desired length, crimp on the casing ferule, trim the inner cable to length and then solder on the carb end cable nipple (ferule and end nipple included in pack). Fits: Custom High bar applications (LH side) for TX650A/XS650B (1974-75) Note: Soldering required and length difference between inner and outer cables must be kept same as stock cables.   Part #51-9510 $14.75 Ea.

Go to Top