- You cannot add "Shock Absorber Set" to the cart because the product is out of stock.
-
Chrome Thick Washer - 10mm x 27mm x 4.5mm. Fits: All Footrest mount bars on 1970-84 650's and shock absorber top mount stud on 1974-79 650's. Part #49-0704 $2.15 Ea. -
Bronze Swingarm Bushings (Set/2) - Replace your plastic factory swing arm bushings! Improve your bikes handling. A first Must Do for All XS650's Fits: All 1970-84 650's Part #28-1024 $39.95/Set/2 -
Sale!
Steering Head Bearing Kit - Kit replaces factory loose ball bearings & races. Tapered Roller bearings have 10 times the contact area and less flex. Drop in replacement for factory original type. Japanese made Superior Quality. Fits: 1970-84 XS/TX 650's. Part #28-2009 $38.95 Set -
Sale!
Performance Progressive wound Front Fork Spring Set. Springs improve handling while retaining OEM geometry. Stops front end droop and diving during braking while improving cornering stability. Progressive design combats bottoming in harsh conditions by increasing resistance as spring compresses. 24mm. Dia. x 484mm. long. 25/35 Lb./in rate Fits: 35mm. stock forks on XS650 (1977-84) Part #27-1088 $45.95/Set/2 -
Damper Bolt Sealing Washers - Copper (Pk./2) - Fits under allen socket head damper retaining bolts (Lower fork leg to inner dampers). Fits: 72-84 XS2/TX650/A/XS650B-L. Part #18-5020 $1.70/Pk./2 -
Fork Tube Cap O-Ring (Pk./2) for 35mm. Forks Fits: All XS650's 1977-84 Part #27-5001 $2.50/Pk./2 -
Swingarm Pivot Bolt (Shaft) - Bolt with full-size thread ( replaces undercut original ). Fits:XS1/XS1b/XS2/TX650 (1970-73 ). Check your original for cracks at the threads. Part #27-1071 $19.95 Ea. -
Bushing (Swingarm Bolt Tube). OEM Ref.# 341-22184-00. Tube is a slip fit through bronze bushings. Replace if original is galled or will not fit through new bronze bushings. Fits: All 650's 1970-84 Part #27-1068 $25.95 Ea. -
Swingarm Bolt Grease Fitting - Replace original grease fittings with ones that fit to common American size grease guns. Fittings fit to ends of swingarm shaft (bolt). 2 required per bike. Fits: All 650's 1970-84 Part #28-1026 $1.95 Ea. -
Sale!
Performance Progressive wound Front Fork Spring Set. Springs Improve handling while retaining OEM geometry. Stops front end droop and diving during braking while improving cornering stability. Progressive design combats bottoming in harsh conditions by increasing resistance as spring compresses. 23mm. Dia. x 495mm. long. 30/40 Lb. /in rate. Fits: 34mm. stock forks on TX650A (1974) and XS650B/C (1975-76) Part #27-1087 $45.95 Set/2 -
Sale!
Front Fork Damper Valves (Pk./2) Tuneable Valves are installed on top of the front fork dampening rods and below the fork springs. The adjustable Damper Valve make rod style fork dampers perform like modern cartridge style forks. Fits: 35mm. forks on 1978-84 XS650's. The Best suspension upgrade modification for the XS650 Note: Damper rod drilling required. Photo install instructions included. Part #27-1086 $42.95/Pk./2 -
Sale!
XS1/XS1b 1970-71 Shrouded type shock absorber set. Chrome and Yellow XS1b type paint 12.7" eye to eye 10.2mm. mounting eye both ends Fits: 1970-71 XS1/XS1b Part #06-3611 $79.95/Set -
Sale!
Fork Tube Caps - Set/2 - Stock Steel OEM type - Flat bottom no preload adjuster. OEM Ref.# 1T3-23111-50-00 Caps Fit: 35mm. fork tubes on XS650D (1977) and also fit to all 1978-84 fork tubes Recommended type for 77-84 models using our 27-1088 progressive type fork springs and/or our fork damper valves #27-1086. Note: Use Fork Cap Tool (17mm Hex) #35-1081 to remove or install. Caution! Fine thread, use care when installing. Part #27-4003 $29.95/Set/2 -
Hydraulic Steering Damper Hydraulic Steering Damper - 7 Position Adjustable in 20Lb force increments. Quality Made in Japan. Ideal for sidecar or racing use. Frame bracket must be fabricated to adapt to your application. Part #28-4008 $52.95 Ea. -
Steering Head Bolt with Domed Head and Matching Chrome Radiused Washer. Improved appearance over stock style. Fits: All 650's with a steering head post Bolt (not models with a damper). Part #49-0752 $12.95/Set/2 -
Fork Tube Caps - Set/2 - Stock Chromed Steel OEM type Caps. OEM Ref# 256-23111-60-00 Fit: 34mm fork tubes on - XS1/XS1b/XS2 (1970-72) Caution! Fine thread, use care when installing. Part #27-4000 $29.95/Set/2