-
Damper Bolt Sealing Washers - Copper (Pk./2) - Fits under allen socket head damper retaining bolts (Lower fork leg to inner dampers). Fits: 72-84 XS2/TX650/A/XS650B-L. Part #18-5020 $1.70/Pk./2 -
Damper Retaining Bolt (Pk/2). Fits into lower fork leg to inner fork damper. Special size allen socket head. OEM Ref.# 278-23181-50-00 Fits: XS650's 1973-84 Part #18-5021 $3.80/Pk./2 -
Out of stock
Fork Seal Set - 35 x 48 x 10.5/11 - Made In Japan by OEM supplier. Fits: 1977-84 XS 650's (35mm. Fork Tubes). Part #27-1007 $8.95/Set -
Out of stock
Fork Seal Set - 34 x 46 x 10.5 - Made In Japan by OEM Supplier. Fits: 1970-76 TX/XS 650's (34mm. fork Tubes) Part #27-1016 $8.95/Set -
Out of stock
Fork Seal Washers Pk/2. Fit on top of Fork Seals and below the spring clips in the lower fork legs. Fits: All 1977-84 650's ( 35mm. Forks ) Part #27-1062 $3.69/Pk./2 -
Out of stock
Fork Seal Spring Clips (Pk./2) - These clips fit into the groove above the fork seals in the lower fork legs. Fits: All 1977-84 650's ( 35mm. forks ) Part #27-1063 $3.69/Pk./2 -
Out of stock
Fork Seal Dust Covers (Pk/2) Fits: 1977-84 XS650D-K ( 35mm. fork tubes ) Part #27-1065 $16.95/Pk./2 -
Out of stock
Fork Seal Dust Covers (Pk/2) Fits: 1971-76 XS/TX650's ( 34mm. fork tubes ). Part #27-1066 $16.95/Pk./2 -
Out of stock
Fork Brace - Stiffens front end, improves handling. Precision Steel construction, Chrome plated finish. Fits: 1977-84 650's (over fender). Part #27-1070 $52.95/Ea. -
Sale!
Front Fork Damper Valves (Pk./2) Tuneable Valves are installed on top of the front fork dampening rods and below the fork springs. The adjustable Damper Valve make rod style fork dampers perform like modern cartridge style forks. Fits: 35mm. forks on 1978-84 XS650's. The Best suspension upgrade modification for the XS650 Note: Damper rod drilling required. Photo install instructions included. Part #27-1086 $42.95/Pk./2 -
Sale!
Performance Progressive wound Front Fork Spring Set. Springs Improve handling while retaining OEM geometry. Stops front end droop and diving during braking while improving cornering stability. Progressive design combats bottoming in harsh conditions by increasing resistance as spring compresses. 23mm. Dia. x 495mm. long. 30/40 Lb. /in rate. Fits: 34mm. stock forks on TX650A (1974) and XS650B/C (1975-76) Part #27-1087 $45.95 Set/2 -
Sale!
Performance Progressive wound Front Fork Spring Set. Springs improve handling while retaining OEM geometry. Stops front end droop and diving during braking while improving cornering stability. Progressive design combats bottoming in harsh conditions by increasing resistance as spring compresses. 24mm. Dia. x 484mm. long. 25/35 Lb./in rate Fits: 35mm. stock forks on XS650 (1977-84) Part #27-1088 $45.95/Set/2 -
Fork Gaitors (Set/2) for 1970 XS1 650 but adaptable to All 1971-84 models. (Remove stock dust covers). Give your 650 that "British" look. Provides great fork protection. 1970 models had a lip piece on the lower triple tree on whicht o clamp the boot, for later models simply insert a piece of split rubber rad hose inside and clamp the upper part of the boot to the fork tube. We suggest a breathing hole be punched on a lower pleat also (face to rear) to allow venting of air. Part #27-1089 $22.95/Set/2 -
Out of stock
Cap (Fork Tube Top Cap/Rubber Plug) - Pk/2 - Original type as used on 1977-84 XS650's. Part #27-1091 $5.50/Pk./2 -
Out of stock
Cap (Fork Tube Top Cap/Rubber Plug) - Pk/2 - Original type as used on 1974-76 TX/XS650's + 27-4003 Part #27-1092 $4.20 Pk.2 -
Fork Tube Caps - Set/2 - Stock Chromed Steel OEM type Caps. OEM Ref# 256-23111-60-00 Fit: 34mm fork tubes on - XS1/XS1b/XS2 (1970-72) Caution! Fine thread, use care when installing. Part #27-4000 $29.95/Set/2 -
Out of stock
Fork Tube Caps - Set/2 - Stock Aluminum OEM type. Replaces OEM # 341-23111-50/51 Caps Fit: 34mm. fork tubes on TX650A (1974) & XS650B/C (1975-76) Note: Use Fork Cap Tool (17mm. Hex) #35-1081 to remove or install. Caution! Fine thread, use care when installing. Part #27-4002 $29.95/Set/2 -
Sale!
Fork Tube Caps - Set/2 - Stock Steel OEM type - Flat bottom no preload adjuster. OEM Ref.# 1T3-23111-50-00 Caps Fit: 35mm. fork tubes on XS650D (1977) and also fit to all 1978-84 fork tubes Recommended type for 77-84 models using our 27-1088 progressive type fork springs and/or our fork damper valves #27-1086. Note: Use Fork Cap Tool (17mm Hex) #35-1081 to remove or install. Caution! Fine thread, use care when installing. Part #27-4003 $29.95/Set/2 -
2F0 type Fork Tube Caps - Set/2 - Stock Aluminum type but with No preload adjuster. Caps Fit: 35mm fork tubes on XS650's 1977-84. Replaces troublesome adjustable US model Cap used on 1978-84 650's Note: Adjustable caps were never used on 650's outside of North America. 22mm Hex top Caution! Fine thread, use care when installing. Part #27-4004 $29.95 /Set/2 -
Fork Tube Cap O-Rings (Pk./2) for 34mm Forks Fits: XS1/XS1b/XS2/TX650/TX650A/XS650B/XS650C (1970-76) Part #27-5000 $2.50 Pk./2 -
Fork Tube Cap O-Ring (Pk./2) for 35mm. Forks Fits: All XS650's 1977-84 Part #27-5001 $2.50/Pk./2 -
17mm. Hex (Allen) Bit Tool to Remove Fork Tube Top Caps. A perfect fit to remove those soft alloy fork tube caps without damage. Fits: Fork caps on TX650A (1974), XS650BC (75-76) and 1977D (version without preload adjuster). Part #35-1081 $6.25 Ea. -
Fork Oil Level Gauge for Adjusting the Oil Level on all XS650 Forks. Adjustable ring measures oil levels from 0-300mm. in 50mm. increments. 60ml. capacity syringe adjusts fluid levels. Part #35-1084 $11.95/Set -
Damper Bolt Driver 8mm Hex - Deep type damper bolt driver used to air impact recessed damper bolts from lower fork legs. 8mm. x 92 Fits: Stock forks 1973-84 Part #35-5022 $5.95 Ea.