-
Out of stock
Fork Tube Caps - Set/2 - Stock Aluminum OEM type. Replaces OEM # 341-23111-50/51 Caps Fit: 34mm. fork tubes on TX650A (1974) & XS650B/C (1975-76) Note: Use Fork Cap Tool (17mm. Hex) #35-1081 to remove or install. Caution! Fine thread, use care when installing. Part #27-4002 $29.95/Set/2 -
Sale!
Fork Tube Caps - Set/2 - Stock Steel OEM type - Flat bottom no preload adjuster. OEM Ref.# 1T3-23111-50-00 Caps Fit: 35mm. fork tubes on XS650D (1977) and also fit to all 1978-84 fork tubes Recommended type for 77-84 models using our 27-1088 progressive type fork springs and/or our fork damper valves #27-1086. Note: Use Fork Cap Tool (17mm Hex) #35-1081 to remove or install. Caution! Fine thread, use care when installing. Part #27-4003 $29.95/Set/2 -
2F0 type Fork Tube Caps - Set/2 - Stock Aluminum type but with No preload adjuster. Caps Fit: 35mm fork tubes on XS650's 1977-84. Replaces troublesome adjustable US model Cap used on 1978-84 650's Note: Adjustable caps were never used on 650's outside of North America. 22mm Hex top Caution! Fine thread, use care when installing. Part #27-4004 $29.95 /Set/2 -
Fork Tube Cap O-Rings (Pk./2) for 34mm Forks Fits: XS1/XS1b/XS2/TX650/TX650A/XS650B/XS650C (1970-76) Part #27-5000 $2.50 Pk./2 -
Fork Tube Cap O-Ring (Pk./2) for 35mm. Forks Fits: All XS650's 1977-84 Part #27-5001 $2.50/Pk./2 -
Swingarm Needle Bearing Conversion Kit - Kit includes Needle Bearings & Hardened shaft. Made in Japan. Fits: XS/TX650's 1974-84. Part #28-1011 $79.95/Kit -
Out of stock
Replacement Shaft Needle Bearing for #28-1011 Conversion Kit. Part #28-1020 $7.95 Ea.
-
Bronze Swingarm Bushings (Set/2) - Replace your plastic factory swing arm bushings! Improve your bikes handling. A first Must Do for All XS650's Fits: All 1970-84 650's Part #28-1024 $39.95/Set/2
-
Out of stock
Swingarm Grease Seal Set - Holds grease into bushings & shaft area of swing arm. Helps seal out water & dirt. If your bike has originals they should be replaced! (20+ years). Made in Japan. Fits: All 650's 1970-84 Part #28-1025 $11.85/Set/2
-
Swingarm Bolt Grease Fitting - Replace original grease fittings with ones that fit to common American size grease guns. Fittings fit to ends of swingarm shaft (bolt). 2 required per bike. Fits: All 650's 1970-84 Part #28-1026 $1.95 Ea.
-
Sale!
Steering Head Bearing Kit - Kit replaces factory loose ball bearings & races. Tapered Roller bearings have 10 times the contact area and less flex. Drop in replacement for factory original type. Japanese made Superior Quality. Fits: 1970-84 XS/TX 650's. Part #28-2009 $38.95 Set
-
Alloy Damper Bracket Alloy Bracket - For Fork tube end of our Hydraulic Steering Damper. Made in Japan Fits: 35mm. Fork tubes on Yamaha XS650’s (1977-84). Part #28-4001 $19.95 Ea -
Hydraulic Steering Damper Hydraulic Steering Damper - 7 Position Adjustable in 20Lb force increments. Quality Made in Japan. Ideal for sidecar or racing use. Frame bracket must be fabricated to adapt to your application. Part #28-4008 $52.95 Ea. -
Alloy Damper Bracket Alloy Bracket - For Fork tube end of our Hydraulic Steering Damper. Made in Japan Fits: 34mm. Fork tubes on Yamaha XS/TX650’s (1971-76). Part #28-4014 $19.95 Ea. -
17mm. Hex (Allen) Bit Tool to Remove Fork Tube Top Caps. A perfect fit to remove those soft alloy fork tube caps without damage. Fits: Fork caps on TX650A (1974), XS650BC (75-76) and 1977D (version without preload adjuster). Part #35-1081 $6.25 Ea. -
Fork Oil Level Gauge for Adjusting the Oil Level on all XS650 Forks. Adjustable ring measures oil levels from 0-300mm. in 50mm. increments. 60ml. capacity syringe adjusts fluid levels. Part #35-1084 $11.95/Set
