-
Sale!
Valve Spring Compressor - Large Honda Heavy Duty Type. This style valve spring Compressor works best on the XS650. Part #35-0122 $39.95 ea. -
Sale!
Chain Puller Tool, Pulls new rear-drive chain ends together so that the joiner link can be slipped in place. Ideal for new chains that are difficult to get together for the first time. Part #35-0130 $9.95 ea. -
Out of stock
Circular Spark Plug Gap Tool. Marked in thousandths of an inch and millimeters. Part #35-0136 $1.95 ea. -
Out of stock
1/2" Drive 27mm. 6 Point Deep Socket. Fits: Clutch Hub Nut on All 650's 1970-84. Part #35-1078 $7.50 ea. -
17mm. Hex (Allen) Bit Tool to Remove Fork Tube Top Caps. A perfect fit to remove those soft alloy fork tube caps without damage. Fits: Fork caps on TX650A (1974), XS650BC (75-76) and 1977D (version without preload adjuster). Part #35-1081 $6.25 Ea. -
27mm. Box Wrench to fit XS650 Oil Drain Plugs. Long (15") Type for Leverage to Loosen Those Tight Oil Plugs. Part #35-1083 $10.60 ea.
-
Fork Oil Level Gauge for Adjusting the Oil Level on all XS650 Forks. Adjustable ring measures oil levels from 0-300mm. in 50mm. increments. 60ml. capacity syringe adjusts fluid levels. Part #35-1084 $11.95/Set
-
Out of stock
Piston Ring compressor Set Fits 75mm. thru 80mm. piston rings. Part #35-1087 $14.95 ea. -
Sale!
Precision Carb Sync Gauges Dual Carb Sync Gauge Set with Built in Adjustable Pulse Dampers Mounted on Bracket and with Hoses. Precision Diaphragm type gauge set originally designed for Professional Motorcycle shop use in Japan. Note: Sync gauges hoses hook up to carb holder vacuum air barbs (not included). Your bike must have these air barbs in order to use this sync tool. Part #35-1388 $49.95/Set -
Feeler Guage Set - Metric/Inch Feeler Gauge Set for Setting Valve and Contact Point Clearances. 32pc. Set (Marked in Metric and Inch Sizes). 0.03mm. - (.001") 0.04mm. - (.0015") 0.05mm. - (.002") 0.06mm. - (.0025") 0.07mm. - (.0028") 0.08mm. - (.003") 0.09mm. - (.0035") 0.10mm. - (.004") 0.13mm. - (.005") 0.15mm. - (.006") 0.18mm. - (.007") 0.20mm. - (.008") 0.23mm. - (.009") 0.25mm. - (.010") 0.28mm. - (.011") 0.30mm. - (.012") 0.33mm. - (.013") 0.35mm. - (.014") 0.38mm. - (.015") 0.40mm. - (.016") 0.45mm. - (.018") 0.50mm. - (0.20") 0.55mm. - (.022") 0.60mm. - (0.24") 0.63mm. - (.025") 0.65mm. - (0.26") 0.70mm. - (0.28") 0.75mm. - (0.30") 0.80mm. - (0.32") 0.85mm. - (0.34") 0.90mm. - (0.36") 1.00mm. - (0.40") Part #35-1769 $12.95 ea. -
Out of stock
Ring Wrench to Tighten Steering Head Cogged Nuts. Also fits preload adjuster on some stock Yamaha Shocks. Fits: 60 and 65mm. Part #35-3005 $9.50 Ea. -
Clutch Holder Tool - Holds Inner and Outer Clutch Hubs So That the Center Nut May be Removed Without Damaging Hubs. Fits: All 650 clutches (1970-84). Part #35-5021 $7.95 ea. -
Damper Bolt Driver 8mm Hex - Deep type damper bolt driver used to air impact recessed damper bolts from lower fork legs. 8mm. x 92 Fits: Stock forks 1973-84 Part #35-5022 $5.95 Ea. -
Out of stock
Ring Wrench Ring Wrench to Tighten Muffler Joint Nut on Early XS1 Type Muffler Part #35-5029 $2.95 Ea. -
Out of stock
Ring Wrench to Adjust Shock Preload. Fits: Our 06-3601/06-3607/06-3608/06-3621/06-3627/06-3641 & 06-3647 shock sets and many other aftermarket shocks. Part #35-5033 $2.90 Ea. -
Out of stock
Timing Light Inductive Xenon Timing Light. Operates from bikes 12 Volt battery power. The only accurate way to set your 650’s timing and check the advance function. Part # 35-9000 $22.95 Ea
