- You cannot add "Petcock Mount O-Ring" to the cart because the product is out of stock.
-
Blind Plug Blind Plug - Carb Holder Air Barb - OEM Ref.# 1J7-13569-00. Fits: 1978-84 XS650 stock carb holders & blocks off air barbs when vacuum petcocks are replaced with manual type petcocks. Order quantity needed. Fits: All XS Carb Holders and Carb Holders for Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650. Note: Each carb holder requires 1 Blind Plug. Part #48-1447 $0.90 Ea.
-
Out of stockPetcock Rear Cover Gasket Petcock Rear Cover Gasket - (2 Hole) - OEM Ref.# 256-24522-00. Fits: TX/XS650's 1973-77 + our #20-0019 petcock. Part #20-0052 $1.90 Ea.
-
Out of stock
Fuel Line Y Fits: 1/4" - 5/16" ID fuel line. Part #20-0006 1.95/Pc. -
Out of stock
Petcock Mount O-Ring Petcock Mount O-Ring - (Tap to Tank O-Ring) Oem Ref. # 256-24512-00 Fits: Stock Petcocks on 1970-77 650's 15 x 55 x 2mm. Part #20-0015 $2.70 Ea. -
Out of stockPetcock 90 Degree Outlet Fitting Petcock 90 Degree Outlet Fitting - Replacement Fitting - Fits: XS650 Petcocks - #20-0019/0050/0051 - Use as Required (Not Original on 20-0050/20-0051 Petcocks). Part #20-6420 $2.95 Ea.
-
Out of stock
Carb Link Bar Screws BS34/38 Carb Link Bar Screws - Set/4 Stainless Socket head screws - 6mm. x 13mm. x M1.00 ( Max 15mm. ) Part # 48-0989 $3.90/Set/4 -
Out of stockPetcock Filter with Attached Filter Screen. Petcock Filter with Attached Filter Screen. Check thread size - Fits: Original Yamaha Manual Petcocks 1970-77 and (#20-0050/51) Only. Part #20-6421 $3.95 Ea.
-
Sale!Front Gas Tank Mount Rubber Gas Tank Mount Rubber, Front. Fits: All 650's 1970-84. Part #02-6530 $5.78/Pk./2
-
Out of stockGas Cap Rubber Seal Gas Cap Rubber Seal, OEM Ref.# 341-24612-01 Fits: All 1974-75 XS/TX 650 gas caps. Part #20-0038 $6.30 Ea.
-
Out of stockRear Gas Tank Mount Rubber Gas Tank Mount Rubber, Rear. Fits: All 650's 1970-84. Part #02-6531 $7.65 Ea.
-
Petcock Rebuild Kit Petcock Rebuild Kit - These Petcocks Have a 3 Screw Rear Cover Plate. Kit Contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc. Rear cover Gasket (3 Screw type). Fits: TX650/A 1973-74, XS650B/C/D 1975-77. Part #20-0014 $11.95/Kit
-
Out of stockGas Cap with Keys Fits: 1976-79 XS650 "Standard" models and our #64-7700 Fuel Tank. Note: Caps from "Standards" and "Specials" look similar but do not interchange. Part #20-0033 $19.95 Ea.
-
Petcock Rebuild kit Petcock Rebuild Kit - These Petcocks Have a 2 Screw Rear Cover Plate. Kit Contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc. Rear cover Gasket (2 Screw). Fits: XS1/XS1B/XS2 1970-72 Part #20-0049 $12.95/Kit
-
Sale!Black Rubber Fuel or Vent Line - (Original Thin Wall Type) 3/16" - 25'
Fuel or Vent Line (4.5mm.) ID x 25' Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650. Note: Each Carb requires 1 pc.(3/16" x 11.5") to go to each fuel feed (Petcock). Part #20-4007 - 3/16" x 25' $14.95/25' Roll -
Fuel Line T Piece Fuel Line T Piece ( Fuel Supply T that fits between Carbs ) Replaces Stock piece on Mikuni BS 34 CV carbs as used on 80-84 XS650's Includes 2 Rubber Seals. Note: T piece replaces the stock plastic or Pot metal Original. The Carbs must be separated to install the T- Piece. Inspect the carb body holes as some are off center or have an irregulat tapered hole which makes it hard to seal. We suggest you replace the Carb link bar screws as they are very hard to get out and may be distorted. Part # 48-0884 $9.90/Kit
-
Sale!
Black Rubber Fuel Line Black Rubber Fuel Line - (Original Thin Wall Type) - 1/4" ID (6mm.) x 25" Length. Part #20-4008 - 1/4" x 25' $14.95/25' Roll