• Chrome Breather Filter with Mount Chrome Breather Filter with Diecast Mount Bracket and Filter Cap.
    • Dimensions:
      • Filter:
        • Height: 49mm
        • Width: 50mm
        • Stem Length: 20mm
        • Stem ID: 7mm
        • Inlet: 3/8"
      • Mount:
        • Height: 12mm
        • Width: 93.5mm
        • Holes C to C: 56.25mm
      Part #15-0680 $16.95 Ea.
  • Breather Filter Breather Filter with Rubber End.   Part #15-0681 $8.40 Ea.
  • Chrome Breather Filter Breather Filter with Chrome Steel Ends.   Part #15-0682 $10.95 Ea.
  • Out of stock
    Carb Holder Clamps Band Clamp - 39-43mm. Range. Can be used for Carb Holders, Air Boxes, Fork Gaitors, Filters etc. Requiring this Size. Part #15-0684 $2.70/Pc.
  • Carb Holder Clamps Band Clamp - 45-49mm. Range. Fits: Keihin PWK 32 Carb holders. Part #15-0685 $2.70/Pc.
  • Out of stock
    Carb Holder Clamps Band Clamp - 63-67mm. Range.   Part #15-0686 $2.70/Pc.
  • Out of stock
    Carb Holder Clamps
    Band Clamp - 68-73mm. Range. Can be used for Carb Holders, Air Boxes, Fork Gaitors, Filters etc. Requiring this Size.   Part #15-0687 $2.70/Pc.
  • Intake Spiggot Gasket (Pk./2) Intake Spiggot Gasket (Carb Holder Rubber) (Pk./2), OEM Ref.# 256-13556-01. Fits: Between XS650 Manifolds (Carb Spacers) and cylinder head and between the XS manifolds and the carb holders for the PWK 32. Fits: 1970-84 650's Keihin Flatslide PWK 32mm XS Performance Carb Set for XS650. And All Stock Carb Holders. Note: 2 sets required. Part #18-0865 $4.90/Pk./2
  • Out of stock
    Fuel Line Y Fits: 1/4" - 5/16" ID fuel line.   Part #20-0006 1.95/Pc.  
  • Fuel Line T Fuel Line T - Ideal for Linking Output from Two Fuel Petcocks into One. Fits: 1/4" - 5/16" ID fuel line.   Part #20-0007 $1.90 Pc.
  • Clear Square Inline Fuel Filter. Clear Square Inline Fuel Filter.   Part #20-0013 $1.90 Ea.
  • Petcock Rebuild Kit Petcock Rebuild Kit - These Petcocks Have a 3 Screw Rear Cover Plate. Kit Contains: 1pc. Valve Rubber, 1pc. Wave Washer, 1pc. Tap to tank O-Ring, 2pc. Tank bolt Washer, 1pc. Drain screw Gasket, 1 pc. Rear cover Gasket (3 Screw type). Fits: TX650/A 1973-74, XS650B/C/D 1975-77. Part #20-0014 $11.95/Kit
  • Out of stock
    Petcock Mount O-Ring Petcock Mount O-Ring - (Tap to Tank O-Ring) Oem Ref. # 256-24512-00 Fits: Stock Petcocks on 1970-77 650's 15 x 55 x 2mm.   Part #20-0015 $2.70 Ea.
  • Sealing Washers for Tap to Tank Mount Screws Sealing Washers for Tap to Tank Mount Screws. Fits: Under Mount Screws on 1970-84 650's.   Part #20-0018 $1.70/Pk./2
  • Petcock - Non Vacuum Type Petcock - Non Vacuum Type to Replace 1978-84 Vacuum Type Petcocks. or to fit Standard type fuel tanks produced by Mike Lalonde prior tp 2011. 1.81" (46mm.) Center to center bolt holes - Fits Right or Left All 1978-84 North American market 650's have original petcocks operated by Vacuum from a line to the intake (on carb holder). 1978-79 models have 2 and 1980-84 models have 1 petcock. Vacuum petcocks are chronic leakers and are all getting to the point of being non-repairable. Our petcock is the Early type 650 manual petcock with a wider flange cast on it so it will fit in place of the vacuum types. Our Petcock fits to right or left and each comes with the tap to tank O-Ring seal and assorted outlet fittings (petcock has 2 outlet ports). Fittings included: 2 ninety degree, 1 Straight fitting & 1 outlet port Plug. There is an "ON", "OFF" and "Reserve" position.   Part #20-0019 $35.95 Ea.
  • Tap to Tank Mount Screws Tap to Tank Mount Screws (2) and Sealing Washers (2). Fits: All 650's 1970-84.   Part #20-0020 $1.99/Set

Go to Top