-
Out of stock
Carb Choke Plunger Carb Choke Plunger Fits: Stock Mikuni BS38 CV Carbs as used on 1976-79 XS650C/D/E/SE/F/2F/SF. Part #48-2012 $7.65 Ea. -
Out of stockCarb Choke Plunger Carb Choke Plunger Fits: Stock Mikuni BS38 CV Carbs as used on 1972-75 XS2/TX650/TX650A/XS650B 650's. Part #48-2002 $6.95 Ea
-
Out of stock
Carb Choke Plunger Carb Choke Plunger - OEM Ref.# 603-14171-00. Fits: Stock Mikuni BS38 CV Carbs as used on 1970-71 XS1/XS1b 650's. Part #48-2009 $3.50 Ea. -
Out of stockCarb Rebuild Kit Carb Rebuild Kit Kit Contains: 8 Hole choke body Gasket, Float bowl Gasket 256, Float Valve assy. 2.0 with washer, Pilot Jet #27.5 VM22/210 type, #135 SmallRound Main Jet N102/221, Pilot air Screw and spring, Choke plunger and Washer for float bowl main jet access plug. Made in Japan - 1 kit required per carb. Fits: XS650C/D (1976-77) The Slide needle shown in the photo is not included. Part #48-1920 $13.95/Kit
-
Out of stock
Carb Rebuild Kit Carb Rebuild Kit Kit Contains: Slide needle Y22 & clip, Pilot Jet BS30/96 #42.5, Main Jet - #130 Small round N102/221, Float Needle & Seat assembly #2.0, Air Screw with spring, Choke Plunger & spring, float bowl Gasket ( 256). Made in Japan - 1 kit required per carb Fits:XS1/XS1b (1970-71) Part #48-1917 $13.95/Kit -
Sale!Black Rubber Fuel or Vent Line - (Original Thin Wall Type) 3/16" - 25'
Fuel or Vent Line (4.5mm.) ID x 25' Fits: Keihin Flatslide PWK 32mm. XS Performance Carbs for XS650. Note: Each Carb requires 1 pc.(3/16" x 11.5") to go to each fuel feed (Petcock). Part #20-4007 - 3/16" x 25' $14.95/25' Roll -
Out of stockThrottle Cable (Black), OEM# 584-26311-10, Made in Japan. Fits: XS650C/D/E/F (1976-79) Standard models and will also fit 1978-84 "Specials" with lower bars. Part #51-3511 $9.80 Ea.
-
Out of stockExtended Throttle Cable - (Black) Throttle - Same as Throttle cable #51-3510 (LH throttle cable to fit TX650A/XS650B (1974-75) but + 350mm (13.75") in length). Total outer cable casing length including throttle end adjuster fitting is approx 56.75" (1441mm). Cut the outer cable to the desired length, crimp on the casing ferule, trim the inner cable to length and then solder on the carb end cable nipple (ferule and end nipple included in pack). Fits: Custom High bar applications (LH side) for TX650A/XS650B (1974-75) Note: Soldering required and length difference between inner and outer cables must be kept same as stock cables. Part #51-9510 $14.75 Ea.
-
Out of stockExtended Throttle Cable - (Black) Throttle - Same as Throttle cable #51-3510 (RH throttle cable to fit TX650A/XS650B (1974-75) but + 350mm. (13.75") in length. Total outer cable casing length including throttle end adjuster fitting is approx 56.75" (1441mm.). Cut the outer cable to the desired length, crimp on the casing ferule, trim the inner cable to length and then solder on the carb end cable nipple (ferule and end nipple included in pack). Fits: Custom High bar applications (RH side) for TX650A/XS650B (1974-75). Note: Soldering required and length difference between inner and outer cables must be kept same as stock cables. Part #51-9509 $14.75 Ea.
-
Out of stock
Fuel Line Y Fits: 1/4" - 5/16" ID fuel line. Part #20-0006 1.95/Pc. -
Out of stock
Carb Link Bar Screws BS34/38 Carb Link Bar Screws - Set/4 Stainless Socket head screws - 6mm. x 13mm. x M1.00 ( Max 15mm. ) Part # 48-0989 $3.90/Set/4 -
Out of stockPetcock Filter with Attached Filter Screen. Petcock Filter with Attached Filter Screen. Check thread size - Fits: Original Yamaha Manual Petcocks 1970-77 and (#20-0050/51) Only. Part #20-6421 $3.95 Ea.
-
Out of stockPetcock 90 Degree Outlet Fitting Petcock 90 Degree Outlet Fitting - Replacement Fitting - Fits: XS650 Petcocks - #20-0019/0050/0051 - Use as Required (Not Original on 20-0050/20-0051 Petcocks). Part #20-6420 $2.95 Ea.
-
Out of stockPetcock Rear Cover Gasket Petcock Rear Cover Gasket - (2 Hole) - OEM Ref.# 256-24522-00. Fits: TX/XS650's 1973-77 + our #20-0019 petcock. Part #20-0052 $1.90 Ea.